User manual SANYO NC-MDU01

[. . . ] The available power required may be exceeded and the computer may be damaged or data may be lost. · Do not connect via a USB connection cable. This may cause interference with other electrical equipment. [. . . ] · Keep the charger out of reach of small children. If children are to use the charger, keep them under observation. · Do not store the charger in locations with high humidity or dust. Model: NC-MDU01 Thank you for purchasing this SANYO product. For safe and correct use, please read these instructions carefully. Please keep the instructions for later reference. Input Output Battery charge times (approx. 500 mA DC 1. 2 V, 850 mA x 1 (Quick), 450 mA x 2 eneloop Ni-MH AA (typ. 120 min AA/AAA USB Charger Ni-MH Operating Instructions · This is a small and slim eneloop charger for AA and AAA HOW TO CHARGE 1. Insert one or two eneloop batteries into the charger. the adjuster depending on the type of battery to be charged. · One or two AA or AAA eneloop batteries can be charged. · Raise the adjuster to charge AA batteries. · Lower the adjuster to charge AAA batteries. PARTS DESCRIPTION Adjuster (+) contact Raise for AA batteries Lower for AAA batteries LED Charge indicator Cord USB connector USB housing (-) contact for AA and AAA (*) Guideline value only; actual charging times may vary slightly. Dimensions (L x W x H) 93 x 47 x 17. 5 mm Weight Approx. 47 g Charging temperature 0 °C ­ 40 °C range Connector type USB type A Compatible computer Models with a USB port as standard equipment where the computer manufacturer guarantees models the operation of the USB port and has a USB port fitted as Standard equipment. HOW TO INSERT THE BATTERY Depending on whether the adjuster is raised or not, one or two AA or AAA batteries can be charged. Raise the adjuster for AA batteries Lower the adjuster for AAA batteries ster · AA and AAA batteries cannot be charged at the same time. Note: Insert the batteries matching the polarity of the charger. Insert the USB connector of the charger into the USB port of an operating computer. Charging takes place when the LED charge Indicator is flashing. [. . . ] · Charging has been paused for temperature protection. · During charging of one battery, another battery has been added. (*) Please refer to the instructions for your computer and cancel standby mode. LED Charge indication light ­ ­ ­ ­ ­ ­ ­ ­ Approx. [. . . ]