User manual SANYO PDG-DET100L

[. . . ] Multimedia Projector MODEL PDG-DET100L Projection lens is optional. Owner's Manual Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features. DLP® projector with high resolution Multilanguage Menu Display This projector is compatible with Full HD signals, allowing high definition projection. It is also compatible with two different types of userchangeable color wheels allowing high brightness or rich color reproduction. The combination of BrilliantColor TM and the rich color reproduction color wheels (supplied) offer a more true color reproduction. [. . . ] ALL DEL Delete all the data in the list. Press the SELECT button and a confirmation box appears and then select [Yes]. Auto picture control Use the Point 7 8 buttons to select the desired Auto picture control position (Off, L1 or L2). BrilliantColor BrilliantColor extends the exposure range and sharpens detail for grain free images. Use the Point 7 8 buttons to select from (Off/On). Use the Point 7 8 buttons to select the desired Color temp. level (XLow, Low, Mid, or High). LIST MODE COLOR PALETTE DEL ALL DEL MENU COLOR M . Note: ·Auto picture control is fixed to `Off' when `DICOM` is selected in the Image level selection (pp. 39, 43). ·When `DICOM` is selected in the Image level selection, you can select the Color temp. level from Blue base, Clear base, High, Mid, Low, or XLow (pp. 39, 43). will be displayed in grayout when `Dynamic` is selected in the Image level selection (pp. 39, 43). 47 Picture Image white balance (Red/Green/Blue) Press the Point 7 button to lighten red/green/blue tone; press the Point 8 button to deepen red/green/blue tone (from 0 to 63). Offset (Red/Green/Blue) Press the Point 7 button to lighten red/green/blue tone of the black level of an image; press the Point 8 button to deepen red/ green/blue tone of the black level of an image (from 0 to 63). Sharpness Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 31). Gamma Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Noise reduction Noise interference on the screen can be reduced. Press the Point 7 8 buttons to change the noise reduction mode. Noise reduction mode is "Off" On . Noise reduction mode is "On" Progressive An interlaced video signal can be displayed in progressive mode. Press the Point 7 8 buttons to change the progressive scan mode. With this function, the projector reproduces pictures faithful to the original film quality. Press the SELECT button at this icon to display the previous items. Press the SELECT button at this icon to display other items. Press the Point 7 8 buttons to adjust the setting value. Note: ·Picture is distorted at the moment of On/Off /Film switching. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. [. . . ] · The values in the figure are example only. · Each image frame is displayed in green, and each set width is displayed in red. · The areas to be overlapped are shaded. 4 Adjust the position, focus and zoom of each image if necessary, and then overlap the shaded areas by using the lens shift function. When the shaded areas are overlapped with each other correctly, the red lines turn yellow. Green frame Yellow lines 90 Appendix 5 Set `Test pattern' to `On' to display a 50 % white image. [. . . ]