User manual SANYO PDG-DHT100L

[. . . ] Multimedia Projector MODEL PDG-DHT100L Projection lens is optional. Owner's Manual Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features. DLP® projector with high resolution Multilanguage Menu Display This projector is compatible with Full HD signals, allowing high definition projection. It is also compatible with two different types of userchangeable color wheels allowing high brightness or rich color reproduction. The combination of BrilliantColor TM and the rich color reproduction color wheels (supplied) offer a more true color reproduction. [. . . ] You can store up to eight (8) color management data. Use the Point 7 8 buttons to adjust the setting value. 1 2 3 Use the Point ed buttons to move the red frame pointer to Color Management, and then press the SELECT button. The projected image freezes, and the COLOR MANAGEMENT POINTER appears. Use the Point ed7 8 buttons to move the pointer to the spot where you want to adjust the color and then press the SELECT button. The COLOR SELECTION window appears, and the color in the center of the pointer is selected and you can adjust the color. Use the Point ed7 8 buttons to adjust the LEVEL and PHASE of the color, and then press the SELECT button to confirm the setting. Then use the Point ed buttons to adjust the GAMMA for the color and press the SELECT button to accept the setting. After adjusting, press the SELECT button to go to the COLOR MANAGEMENT LIST. POINTER MODE COLOR MANAGEMENT POINTER Note: Displayed in grayout in the computer Input. ·Tint cannot be selected when the video system is PAL, SECAM, PAL -M, or PAL-N (p. 42). ·Color management is displayed in grayout when there is no signal. COLOR SELECTION MODE LIST Go to the COLOR MANAGEMENT LIST. 46 Picture Image COLOR SELECTION MODE (continued) COLOR M . (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color. ) MENU Return to the IMAGE ADJUST Menu. Any settings that have been changed will not be stored. To store the changed settings, be sure to select "LIST" and go to the COLOR MANAGEMENT LIST. COLOR SELECTION MODE Level and phase adjustment palette. Gamma adjustment palette. 4 In the COLOR MANAGEMENT LIST, the adjusted color data are checkmarked. You can decide whether or not to apply the adjusted color data in the list to the projected image (see below). LIST COLOR M . MENU LIST MODE Clear the check mark if you do not want to apply the adjusted color data; select the check mark and then press the SELECT button. COLOR PALETTE Return to the COLOR SELECTION mode so that you can readjust the setting for the color in that line. (This option is not available if the check mark is cleared. ) DEL Select the DEL box if you want to delete the adjusted data. Press the SELECT button and a confirmation box appears and then select [Yes]. ALL DEL Delete all the data in the list. Press the SELECT button and a confirmation box appears and then select [Yes]. Auto picture control Use the Point 7 8 buttons to select the desired Auto picture control position (Off, L1 or L2). BrilliantColor BrilliantColor extends the exposure range and sharpens detail for grain free images. Use the Point 7 8 buttons to select from (Off/On). [. . . ] DDC Clock Output 1 2 3 4 5 6 7 8 Red Output Green Output Blue Output No Connect Ground (Horiz. sync. ) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 No Connect Ground (Vert. sync. ) No Connect No Connect Horiz. Output No Connect DIGITAL DVI-D (DVI 24 PIN) 1 2 3 4 5 6 7 8 T. M. D. S. Data2 Shield No Connect No Connect DDC Clock DDC Data No Connect 9 10 11 12 13 14 15 16 T. M. D. S. Data1 Shield No Connect No Connect +5V Power Ground (for +5V) Hot Plug Detect 17 18 19 20 21 22 23 24 T. M. D. S. [. . . ]