User manual SANYO PDG-DSU20N

[. . . ] Multimedia Projector Projecteur Multimédia Multimedia-Projektor Proyector Multimedia Proiettore Multimediale Owner's Manual/Mode d'emploi/ Bedienungsanleitung/Manual del usuario/ Manuale d'uso MODEL/MODÈLE/MODELO/MODELL/MODELLO PDG-DSU20N/DSU20E/DSU20B To the Owner Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. [. . . ] Do not drop the remote control or jolt it. Keep the remote control out of locations with excessively high temperature or humidity. Do not get water on the remote control or place wet objects on it. Do not disassemble the remote control. EN-16 Installation Connecting the Projector 1 2 3 Audio Cable VGA Cable (D-Sub to D-Sub) (supplied) USB Cable 4 5 6 VGA (D-SUB) to HDTV (RCA) Cable S-Video Cable Composite Video Cable Laptop type Desktop type 1 2 3 1 4 56 When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. The figure above is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. The cables that come with the projector may differ from the above illustration. The included cables are based on actual shipment delivery. EN-17 Powering On/Off the Projector Powering On the Projector: Remove the projector lens cap. Complete the AC power cord and peripheral signal cable(s) connections. Press I/ button to turn on the projector. The projector takes a minute or so to warm up. Turn on your source (computer, notebook, DVD, etc. ). The projector automatically detects your source. If you are connecting multiple sources to the projector simultaneously, press the INPUT button. Warning: Remove the lens cap first before powering on. Never look into the lens when the lamp is on. It is especially important that children are not allowed to look into the lens. Press I/ button to turn off the projector lamp. Press Power again" appear on the screen. The cooling fans continue to operate for cooling cycle. When the LAMP LED begins flashing, the projector has entered stand-by mode. If you want to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered stand-by mode. [. . . ] Do not unplug the power cord or turn the power off before the Lamp LED changes to flashing. The fan motor will turn off when the lamp has cooled. If temperature is too high, the fans will cool the lamp. LAMP LED TEMP LED Amber Amber Solid Solid LAMP LED TEMP LED LAMP LED TEMP LED Green Red Amber Off Solid Flash Solid - Optional Parts The parts listed below are optionally available. When ordering those parts, give the item name and Model No. [. . . ]