User manual SANYO PDG-DXT10L

[. . . ] 2007 · · · · · · DLP is a registered trademark of Texas Instruments. BrilliantColor and DynamicBlack are trademarks of Texas Instruments. IBM is a trademark or registered trademark of International Business Machines Corporation. Macintosh, Mac OS X and PowerBook are trademarks of Apple, Inc. , registered in the U. S. [. . . ] Select the source connected to the S-Video input (see Connecting Your VCR or Laser Disc Player on page 30). Displays information about the type of test pattern (Range: CrossHatch, Raster (0%), Raster (25%), Raster (50%), Raster (100%), Raster Red, Raster Green, Raster Blue, Raster Blue 60, Gray Raster 10, Gray Raster 30, Ramp H, Ramp V). Test Pattern 60 5. Using On-Screen Display Adjust Menu Descriptions and Functions The Adjust menu contains overall projector settings for image output such as sharpness, overscan and color matrix. Three tabs are accessible through the Adjust menu, Picture, Image Options and Video. Image menu The image menu is used to alter picture settings and can be accessed from the Adjust menu. The following table lists all functions with a description and the default setting. ITEM Image select Detail Setting Contrast Brightness Sharpness Color Tint Reset DESCRIPTION Select a set of preset values using or from the list. Notice that the below values will change depending on the preset selection. See Detail Settings Menu Descriptions and Functions on page 67. Adjust the Contrast value using or to highlight the differences between light and dark areas of the picture. Adjust the Brightness value using or to lighten or darken the picture. Adjust the Sharpness value using or to sharpen or blur the borders between colors and objects. Adjust the Color value using or to increase or decrease color input to the picture. Adjust the Tint value using or to increase or decrease the color Hue of the picture. The settings and adjustments are set to initial factory settings. 61 5. Using On-Screen Display Image options menu The Image Options menu is used to configure image options such as screen positioning and aspect ratio. Access the image options menu in the Adjust menu. The following table lists all functions with a description and the default setting. ITEM Screen Overscan DESCRIPTION Select Screen using or from the list (see page 63). Set the Overscan value using or (see page 63). Adjust the position values using the slides. Horizontal: Vertical: Total dots: Fine sync: Adjusts the image location horizontally using or. Adjusts the image location vertically using or. Fine tune a computer image or remove any vertical banding that might appear. Adjust the clock phase or reduce video noise, dot or cross talk. PC adj. Note: Only use the Phase settings after the total dots settings have been modified. 62 5. Using On-Screen Display Screen The screen option allows for the adjustment of the aspect ratio to alter the appearance or ratio of the projected image. 4:3 ­ Standard TV screen (4:3), proportionally four units wide for every three units high, no matter the size of the screen. 16:9 ­ A wide-screen aspect ratio for video. True ­ Displays the current image in its true resolution. [. . . ] Remains unchanged even though you adjust the brightness and/or the contrast. Image appears to be trapezoidal (unchanged even though you carry out the [Keystone] adjustment). Still unchanged even though you press the AUTO PC ADJ. Still unchanged even though you carry out [Reset] in the projector's menu. [. . . ]