User manual SANYO PDP-32H1AN

[. . . ] Only using furniture that can safety support the television. Ensuring the television is not overhanging the edge of the supporting furniture. Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support. Not standing the televisions on cloth or other materials placed between the television and supporting furniture. [. . . ] Highlight VHF CH ( or UHF CH) item, press 3 to or4 button select your desired channel number. DTV Manual Tuning ATV Manual Tuning Programme Edit Select Move Menu Exit Press OK to begin the manual DTV channel search. At the bottom of the menu screen the DTV Signal strength bar is displayed. You can make use of it to check how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The higher the signal strength is, the less likely you are to experience picture degradation. DTV Manual Tuning VHF CH 6 Please select channel then Press OK to search Bad Normal Good 4 Then all the digital programs available in this channel will be searched and stored. During the process, you can press MENU or EXIT to exit the search. Menu Exit Select 16 Memorizing the Channels (Continued) Manual Searching for ATV programs If desired analog programs cannot be searched by Auto Tuning, you can make use of ATV Manual Tuning to search programs manually. Picture Sound Time Option Lock Channel Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit 1 2 3 4 In Channel menu, press 6 ATV Manual Tuning or5 to select item, then press4 or OK to access. Highlight Storage To item, press 3to select a channel or4 button position in which you want to store. Use 6 Search item, press 3 the or5 to select or4 to begin manual ATV channel search. Press 4 , the unit searches towards higher frequency; Press 3 , the unit searches towards lower frequency. The search stops when a program is found and this program will be stored in current channel, then press the RED button to save. During the process, If you want to stop the search , please press EXIT button. Select Move Menu Exit ATV Manual Tuning Storage To Color System Audio System Current CH Search Fine-Tune Frequency Exit SAVE 1 PAL BG 1 445. 25 MHz Select Manual Fine Tuning Fine Tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound effect, use Fine Tune. ATV Manual Tuning 1 2 3 Navigate to ATV Manual Tuning submenu, highlight Current CH item, press 3 a channel you want to perform fine or4 to select tune. If you want to skip more channels, repeat the above steps to set more skip symbols to more channels. Now when you press CH / , these unwanted channels will be skipped. TV TV TV SKIP DEL NAME MOVE SKIP Fav. List Note = If the Programme Edit menu has more than one page, you may press5the page upward or downward. or6 to scroll = To restore a skipped channel, navigate to the Programme Edit menu, select the channel and press BLUE button to cancel the skip symbol. To sort channels This function allows you to arrange the channel order. Programme Edit TV TV TV 1 2 3 Select the channel you want to move in the Programme Edit menu. Press YELLOW button and a move symbol appears alongside the selected channel in the list, then use 6 the channel or5 to move upward or downward to a desired new position. Press YELLOW button again to finish the sorting. Repeat the above steps for each channel you wish to move. TV 1 S-03 2 C-42 3 S-04 4 C-04 MOVE DEL NAME MOVE SKIP Fav. List Note = Edit menu has more than one page, you may press5the page upward or downward. If the Programme or6 to scroll = DTV channels is automatically assigned and cannot be changed by user. The order of the = no MOVE item in DTV mode. There will be To delete channels This function allows you to delete your unwanted channels. Programme Edit TV TV TV 1 2 3 Select the channel you want to delete in the Programme Edit menu. Press RED button and a delete symbol appears alongside the selected channel in the list. Press RED button again to finish the delete. [. . . ] /4 to set the Press 3 On to lock the input source of the unit to AV. /4 to select Select Off to return to normal operation. Note: When the item is set to On, the Channel menu and Lock Tuning item will be grayed out and unselectable. Volume Max AV Lock Note: If AV Lock is set to On, options except AV in the Input Source menu will be grayed out and unselectable. /4 to select When the Panel Lock is set to On, buttons on the control panel on the main unit are not active. [. . . ]