User manual SANYO PLC-EF12N

[. . . ] Multimedia Projector MODEL PLC-EF12N/12NL PLC-EF12E/12EL PLC-EF12B/12BL Owner's Manual TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. [. . . ] For a larger picture, press (v) and for a smaller picture, press (w). Use Wireless remote control unit. Press the ZOOM button and press POINT UP/DOWN button(s) to obtain your desired picture size. The Zoom display will be displayed on the screen for a few seconds. For a larger picture, press (UP) and for a smaller picture, press (DOWN). FOCUS ADJUSTMENT Use Top control and Wireless/Wired remote control unit. Press the FOCUS (v) or (w) button for a sharper, crisper picture. Use Wireless remote control unit. Press the FOCUS button and press POINT UP/DOWN button(s) to obtain a sharper, crisper picture. The Focus display will be displayed on the screen for a few seconds. LENS SHIFT FUNCTION Use Top control and Wireless/Wired remote control unit. Press the LENS SHIFT (v) or (w) button to obtain your desired screen position. Use Wireless remote control unit. Press the LENS SHIFT button and press POINT UP/DOWN button(s) to obtain your desired screen position. The Lens shift display will be displayed on the screen for a few seconds. DIGITAL ZOOM FUNCTION Press the D. ZOOM button on the wireless remote control unit. The "D. zoom" and the magnifying-glass icon is displayed to indicate Digital zoom mode. Digital zoom mode can be adjust the image size or pan the image. To expand the image size, press SELECT (REAR CLICK) button. The image is magnified by degrees (Expand function). To compress the image size, press FRONT CLICK button. The size of image is reduced by degrees (Compress function). To pan the image, press POINT UP/DOWN/LEFT/RIGHT (POINTING PAD) button(s). The image move to the direction indicated (Panning function) See the page 43 for more detail. D. zoom NORMAL PICTURE FUNCTION The normal picture image level is factory preset on the projector and can be restored anytime by pressing the NORMAL button on the projector or on the remote control unit. The "Normal" display will be displayed on the screen for a few seconds. 33 BASIC OPERATION FREEZE PICTURE FUNCTION Press the FREEZE/NO SHOW button on the remote control unit, and the picture will remain on-screen. This function is cancelled when the FREEZE/NO SHOW button is pressed again or any other button is pressed. NOTE: Your computer or video equipment is not affected by this function, and will continue to run. NO SHOW FUNCTION Press the FREEZE/NO SHOW button (on the remote control unit) is twice. The screen will change into black image and the "No show" is displayed on the screen for a few seconds. This function is cancelled when the FREEZE/NO SHOW button is pressed again or any other function button is pressed. P-TIMER FUNCTION Press the P-TIMER button on the remote control unit. The timer display "00:00" appears on the screen and the timer starts to count the time (00:00 to 59:59). Press again the P-TIMER button to stop the timer. [. . . ] No sound. Remote control unit doesn't work. q Check the batteries. q Make sure nothing is blocking between the remote control sensor and remote control unit. q Make sure you are not too far from the projector when using the remote control unit. {Maximum operate range 16. 4 ' (5 m)}. [. . . ]