User manual SANYO PLC-SW30

[. . . ] Multimedia Projector MODEL PLC-SW30 Owner's Manual To the Owner Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. [. . . ] Press Point 7 8 buttons to adjust value. Fine sync PC ADJUST MENU Move the red frame pointer to the item and press SELECT button. Adjusts an image as necessary to eliminate flicker from the display. Press Point 7 8 buttons to adjust value. (From 0 to 31. ) Total dots Adjusts the number of total dots in one horizontal period. Press Point 7 8 buttons and adjust number to match your PC image. Selected Mode Shows status (Stored / Free) of the selected Mode. Horizontal Adjusts horizontal picture position. Press Point 7 8 buttons to adjust the position. Vertical Adjusts vertical picture position. Press Point 7 8 buttons to adjust the position. Current mode Press SELECT button to show the information of computer selected. When the image has a dark bar(s), try this adjustment. Current mode Press Point 7 8 buttons to adjust the value. Press SELECT button at this icon to adjust "Clamp, " "Display area (H/V)" or set "Full screen. " Press SELECT button at Current mode icon to show the information of computer connected. 25 Computer Input Display area Selects area displayed with this projector. Select the resolution at Display area dialog box. Display area H Adjustment of horizontal area displayed with this projector. Press Point 7 8 buttons to decrease/increase value to match the resolution of image. Display area V Adjustment of vertical area displayed with this projector. Press Point 7 8 buttons to decrease / increase value to match the resolution of image. Full screen Press Point 7 8 buttons to switch Full screen function to "On" or "Off. " Set "On" to resize the image with 4 x 3 aspect ratio to fit the screen. Note : Display area, Display area (H/V) and Full screen cannot be adjusted when "480p", "575p", "480i", "575i", "720i (HDTV)" , "1035i (HDTV)" or "1080i (HDTV)" is selected on PC SYSTEM Menu ( P23 ). Press SELECT button at Display area icon to show the Display area dialog box. Display area To clear adjustment data Reset Reset all adjust parameters on adjustment dialog box to previous figure. Mode free To clear adjustment parameters previously set, move the red frame pointer to Mode free icon and then SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press SELECT button. Store To store adjustment parameters, move the red frame pointer to Store icon and then press SELECT button. Move the red arrow pointer to any of Mode 1 to 5 that you want to store to and then press SELECT button. Quit Closes PC Adjust Menu. Close this dialog box. To store adjustment data This Mode has parameters being stored. Vacant Mode Shows values of "Total dots, " "Horizontal, " "Vertical, " "Display area H, " and "Display area V. " 26 Computer Input Image Level Selection Direct Operation Select image level among Standard, Real, Image 1, Image 2, Image 3 and Image 4 by pressing IMAGE button on the remote control. [. . . ] When the projector is cooled down enough and the temperature returns to normal, the POWER indicator lights red and the projector can be turned on. (The WARNING indicator keeps flashing. ) Check and clean the Air filter. The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops flashing. Check and clean the air filters. The projector detects an abnormal condition and cannot be turned on. [. . . ]