User manual SANYO PLC-XF20

[. . . ] Multimedia Projector MODEL PLC-XF20 Projection lens is optional. Owner's Manual TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. [. . . ] Press the POINT LEFT/RIGHT buttons to select INPUT SOURCE and press the SELECT button. Another dialog box INPUT SOURCE Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to "RGB", and then press the SELECT button. RGB When connect the computer output [5 BNC Type (Red, Green, Blue, Horiz. Sync. )] from the computer to the R/Pr, G/Y, B/Pb, H/HV and V jacks. RGB XGA 1 27 COMPUTER MODE AUTOMATIC MULTI-SCAN SYSTEM This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to "COMPATIBLE COMPUTER SPECIFICATION" on page 29). When selecting Computer, this projector automatically tunes to the incoming signal and projects the proper image without any special settings. (Setting of the Computer System may be required when connecting some computers. ) Note : The projector may display one of the following messages. SYSTEM BOX Display the SYSTEM being selected. SYSTEM Analog XGA 1 When select the DVI terminal. SYSTEM RGB XGA 1 Go to PC adj. The projector cannot discriminate or detect the input signal from the computer. Adjust and set the computer system manually. When select the 5 BNC terminal. No signal There is no signal input from the computer. Make sure the connection of the computer and the projector is set correctly. 4 XGA 1 When select the HDB 15-PIN terminal. D-VGA, D-SVGA, D-XGA, D-SXGA 1, D-SXGA 2 or D-SXGA 3 The input signal is digital from the DVI terminal. CURRENT MODE DISPLAY The Current Mode display appears to show the information of the computer being selected. Providing the information of the computer detected by the projector. The systems on this dialog box can be selected. When this mark is displayed as black, more computer system modes will be available. Move the arrow to this mark and then press the SELECT button, and the other modes will be displayed. SELECT COMPUTER SYSTEM MANUALLY To set the Computer system manually, select the mode on the ON-SCREEN MENU. 1 2 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SYSTEM and press the SELECT button. Another dialog box COMPUTER SYSTEM Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the system that you want to set, and then press SELECT button. Close the SYSTEM Menu. 28 COMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and less than 202 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION H-Freq. (Hz) ON-SCREEN DISPLAY RESOLUTION H-Freq. (Hz) VGA 1 VGA 2 VGA 3 VGA 4 VGA 5 VGA 6 VGA 7 MAC LC13 MAC 13 RGB RGB 480P 575P SVGA 1 SVGA 2 SVGA 3 SVGA 4 SVGA 5 SVGA 6 SVGA 7 SVGA 8 SVGA 9 SVGA 10 SVGA 11 MAC 16 XGA 1 XGA 2 XGA 3 XGA 4 XGA 5 XGA 6 XGA 7 XGA 8 XGA 9 640 x 480 720 x 400 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 ­­­­­­­­ (Interlace) ­­­­­­­­ (Interlace) ­­­­­­­­ (Progressive) ­­­­­­­­ (Progressive) 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 (Interlace) 31. 47 31. 47 31. 47 37. 86 37. 86 37. 50 43. 269 34. 97 35. 00 15. 734 15. 625 31. 47 31. 25 35. 156 37. 88 46. 875 53. 674 48. 08 37. 90 34. 50 38. 00 38. 60 32. 70 38. 00 49. 72 48. 36 68. 677 60. 023 56. 47 60. 31 48. 50 44. 00 63. 48 36. 00 59. 88 70. 09 70. 09 74. 38 72. 81 75. 00 85. 00 66. 60 66. 67 30 25 60 50 56. 25 60. 32 75. 00 85. 06 72. 19 61. 03 55. 38 60. 51 60. 31 51. 09 60. 51 74. 55 60. 00 84. 997 75. 03 70. 07 74. 92 60. 02 54. 58 79. 35 43. 59 XGA 10 XGA 11 XGA 12 XGA 13 XGA 14 XGA15 MAC 19 MAC 21 SXGA 1 SXGA 2 SXGA 3 SXGA 4 SXGA 5 SXGA 6 SXGA 7 SXGA 8 SXGA 9 SXGA 10 SXGA 11 SXGA 12 SXGA 13 SXGA 14 SXGA 15 SXGA 16 SXGA 17 SXGA 18 SXGA 19 SXGA 20 MAC MAC HDTV720p HDTV1035i HDTV1080i HDTV1080i 1024 x 768 1024 x 768 1024 x 768 (Interlace) 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1152 x 870 1152 x 864 1280 x 1024 1280 x 1024 1280 x 1024 1280 x 1024 1280 x 1024 1280 x 1024 1280 x 1024 1280 x 1024 1280 x 960 1152 x 900 1152 x 900 1280 x 1024 (Interlace) 1280 x 1024 (Interlace) 1280 x 1024 1280 x 1024 1152 x 900 1280 x 1024 (Interlace) 1280 x 1024 1280 x 1024 1280 x 960 1280 x 1024 ­­­­­­­­ (Progressive) ­­­­­­­­ (Interlace) ­­­­­­­­ (Interlace) ­­­­­­­­ (Interlace) 62. 04 61. 00 35. 522 46. 90 47. 00 58. 03 60. 24 68. 68 64. 20 62. 50 63. 90 63. 34 63. 74 71. 69 81. 13 63. 98 79. 976 60. 00 61. 20 71. 40 50. 00 50. 00 63. 37 76. 97 61. 85 46. 43 63. 79 91. 146 75. 00 80. 00 45. 00 33. 75 33. 75 31. 25 77. 07 75. 70 43. 48 58. 20 58. 30 72. 0 75. 08 75. 06 70. 40 58. 60 60. 00 59. 98 60. 01 67. 19 76. 107 60. 02 75. 025 60. 00 65. 20 75. 60 43. 00 47. 00 60. 01 72. 00 66. 00 43. 35 60. 18 85. 024 75. 08 75. 08 60. 00 30. 00 30. 00 25. 00 When the input signal is digital from the DVI terminal, refer to the chart below. ON-SCREEN DISPLAY RESOLUTION H-Freq. (Hz) ON-SCREEN DISPLAY RESOLUTION H-Freq. (Hz) D-VGA D-SVGA D-XGA 640 x 480 800 x 600 1024 x 768 31. 469 37. 879 48. 363 59. 940 60. 317 60. 004 D-SXGA 1 D-SXGA 2 D-SXGA 3 1280 x 1024 1280 x 1024 1280 x 1024 63. 981 60. 276 31. 65 60. 020 58. 069 29. 8 NOTE : Specifications are subject to change without notice. 29 COMPUTER MODE PC ADJUSTMENT This Projector can automatically tune to the display signals from most personal computers currently distributed. [. . . ] If the projector fails to work properly, see "TROUBLESHOOTING" section on page 46, 47. To correct the failure, try the "Solutions". If after following all operating instructions, you find that service is necessary, contact the Sanyo Service Station or the store where you purchased the unit. Give the model number and explain the difficulty. [. . . ]