User manual SANYO PLC-XP100L

[. . . ] Multimedia Projector MODEL PLC-XP100L PLC-XP100BKL Projection lens is optional. Owner's Manual Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1. 07 billion colors, and matrix liquid crystal display (LCD) technology. Functionally Rich Power Management This projector has many useful functions such as lens shifting, ceiling and rear projection, perpendicular omnidirectional projection, variety of lens options, etc. The Power management function reduces power consumption and maintains lamp life (p. 52). Multilanguage Menu Display Multi-use Remote Control Use the remote control as wired and wireless, or as a PC wireless mouse. [. . . ] Use the Point ed buttons to move the red arrow pointer to the desired system and then press the SELECT button. Video jack or S-Video jack Auto The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL or PAL select the system manually. -M -N, PAL/SECAM/NTSC/NTSC4 . 4/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4. 43, PAL-M, and PAL -N. AV SySTEM MENU (VIDEO OR S-VIDEO) AV System Menu icon The selected system is displayed Move the pointer to the desired system and press the SELECT button. y, Pb/Cb, Pr/Cr jacks Auto The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. When the Video System is 1035i or 1080i, select the system manually. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i. AV SySTEM MENU (COMPONENT VIDEO) AV System Menu icon The selected system is displayed. Move the pointer to the desired system and press the SELECT button. 41 Video Input Image Level Selection Menu Operation 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. Use the Point ed buttons to move the red frame pointer to the desired image level and then press the SELECT button. IMAGE SELECT MENU Image Select Menu icon Standard Normal picture level preset on the projector. Cinema Picture level adjusted with fine tone. IMAGE 1­10 User preset picture adjustment in the Image Adjust Menu. 47) Move the red frame pointer to the desired level and press the SELECT button. 4 Video Input Screen Size Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button. SCREEN MENU Screen Menu icon Normal Provide the image at the normal video aspect ratio of 4:3. Wide Provide the image at the wide screen ratio of 16:9. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds. To display the Aspect dialog box, press the SELECT button at Custom again and then the Aspect dialog box appears. Adjust the Horizontal/Vertical screen scale. When set to "On, the aspect ratio is fixed. " The "Scale V" appears dimmed and becomes unavailable. Adjust "Scale H, then the screen " scale is automatically modified based on the aspect ratio. [. . . ] For installation and replacement of the lens, always contact the sales dealer. The projector lens must be installed or replaced by well-trained sales or service engineers. Do not attempt to install and replace the lens by yourself as it may cause injury. Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector. [. . . ]