User manual SANYO PLC-XU88

[. . . ] Multimedia Projector MODEL PLC-XU88 Wireless LAN Network Supported IEEE802. 11b/g Wired LAN 100-Base-TX/10-Base-T SD Card Memory Viewer Memory Viewer *Refer to the owner's manuals below for details about network and memory viewer function. Network Set-up and Operation Memory viewer Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to use. Multilanguage Menu Display Operation menu is available in 16 languages; English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, and Japanese (p. 46). Simple Computer System Setting The projector has the Multi-scan system to conform to almost all computer output signals quickly (p. 31). [. . . ] The On-Screen Menu disappears and "D. Press the SELECT button to expand the image size. Use the Point buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D. ZOOM button on the remote control. Digital zoom ­ Select Digital zoom ­. The On-Screen Menu disappears and "D. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D. ZOOM button on the remote control. To exit the Digital zoom +/­ mode, press any button except the D. ZOOM buttons, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 29-30) again, or adjust the screen size with the D. ZOOM buttons. Remote Control POINT buttons SELECT button D . ZOOM + button D . ZOOM - button Notes: · The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p. 34). · The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size. · True, Full, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 31). · Digital zoom +/- cannot be selected when Full or True is selected. 8 Video Input Input Source Selection (Video, S-video) Direct Operation Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Top Control INPUT button INPUT button Computer 1 (Analog) Computer 1 (Digital) Computer Video wired wireless Remote Control Menu Operation VIDEO button 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Input Menu icon. Use the Point buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu. Move the pointer to the desired source and then press the SELECT button. Auto When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1. Video VIDEO Source Select Menu (VIDEO) Move the pointer to the source that you want to select and press the SELECT button. Move the pointer to Video and press the SELECT button. Input Menu Input Menu icon Video S-video When video input signal is connected to the VIDEO jack, select Video. [. . . ] (KHz) 31. 47 31. 47 31. 25 37. 879 43. 363 48. 36 47. 7 48. 36 56. 160 46. 500 47. 776 60. 289 V-Freq . (Hz) 59. 94 59. 88 50. 00 60. 32 60. 00 60. 00 60. 00 60. 00 72. 000 50. 000 59. 870 74. 893 ON-SCREEN DISPLAy D-SXGA1 D-SXGA2 D-SXGA3 D-720p D-720p D-1035i D-1080i D-1080i RESOLUTION 1280 x 1024 1280 x 1024 1280 x 1024 1280 x 720 1280 x 720 1920 x 1035 1920 x 1080 1920 x 1080 H-Freq . (KHz) 63. 98 60. 276 31. 65 37. 50 45. 00 33. 75 33. 75 28. 125 V-Freq . (Hz) 60. 02 58. 069 29. 80 50. 00 60. 00 60. 00 (Interlace) 60. 00 (Interlace) 50. 00 (Interlace) D-720p50 D-720p60 D-1080i60 D-1080i50 Note: · When the input signal is D-SXGA 1, D-SXGA 2, or D-SXGA 3, images may not be displayed properly depending on computers. [. . . ]