User manual SANYO PLC-XW56

[. . . ] Multimedia Projector MODEL PLC-XW56 Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. It is easy to carry and work anywhere you wish to use. [. . . ] Press the Point buttons to move the red framed pointer to the Image Adjust Menu icon. Press the Point ed buttons to move the red framed pointer to the item that you want to adjust, and then press the SELECT button. Adjust each level by pressing the Point buttons. Contrast Image Adjust Menu Image Adjust Menu icon Move the red framed pointer to the item to be selected and then press the SELECT button. Press the Point button to decrease the contrast and the Point button to increase contrast. (From 0 to 63. ) Brightness Press the Point button to adjust the image darker and the Point button to adjust the image brighter. Press the Point buttons to select the desired Color temp. (XLow, Low, Mid, or High) White balance (Red) Press the Point button to lighten the red tone and the Point button to deepen the red tone. (From 0 to 63. ) White balance (Green) Press the Point button to lighten the green tone and the Point button to deepen the green tone. (From 0 to 63. ) White balance (Blue) Press the Point button to lighten the blue tone and the Point button to deepen the blue tone. (From 0 to 63. ) Sharpness Press the Point button to soften the image and the Point button to sharpen the image. (From 0 to 15. ) Gamma Press the Point buttons to adjust the gamma value to obtain better balance of contrast. (From 0 to 15. ) Reset To reset the adjusted data, select Reset and press the SELECT button. The confirmation box appears and then select [Yes]. All adjustments returns to their previous figures. Press the Point buttons to adjust the value. Selected Image level Note: After adjusting any of the White balance Red, Green, or Blue, the Color temp changes to "Adj. ". 31 Computer Input Store To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point buttons and press the SELECT button. A confirmation box appears and then select [Yes]. Stored data can be called up by selecting "Image" in the Image Level Selection on page 30. Quit Exit the Image Adjust Menu. Store item Press the SELECT button at this item to store the adjusted data. The confirmation box appears, then select [Yes]. Move the red framed pointer to any of Image 1 to 4 where you want to set and then press the SELECT button. Screen Size Adjustment This projector has the picture screen resize function, which enables you to customize the image size. 1 2 Press the MENU button to display the On-Screen Menu. Press the Point buttons to move the red framed pointer to the Screen Menu icon. Press the Point buttons and move the red framed pointer to the function that you want to select and then press the SELECT button. [. . . ] When turning on the projector, the WARNING indicator stops blinking. The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, disconnect the AC power cord and contact the dealer or the service center. [. . . ]