User manual SANYO PLC-XW57

[. . . ] Multimedia Projector MODEL PLC-XW57 Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. It is easy to carry and work anywhere you wish to use. [. . . ] Move the red framed pointer to any of Image 1 to 4 where you want to set and then press the SELECT button. Screen Size Adjustment This projector has the picture screen resize function, which enables you to customize the image size. 1 2 Press the MENU button to display the On-Screen Menu. Press the Point buttons to move the red framed pointer to the Screen Menu icon. Press the Point buttons and move the red framed pointer to the function that you want to select and then press the SELECT button. Normal Screen Menu Screen Menu icon Move the red framed pointer to the function and press the SELECT button. Provide the image to fit the screen size. True Provide the image in its original size. When the original image size is larger than the screen size (104 x 768 ), this projector enters panning mode automatically. When reached to the correction limit, the arrows disappears. Wide Provide the image to fit wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9. Full Provide the full screen image. Note: · This Screen Menu cannot be operated when 70p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p. 6). · The projector cannot display any resolution higher than 1600x100. If your computer's screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. · The image data in other than XGA (104x768) is modified to fit the screen size in initial mode. · True, Full, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 6). 3 Computer Input For zooming in and out the images Digital zoom + When the D. ZOOM + () is pressed, the On-Screen Menu disappears and the message "D. Press the D. ZOOM or the SELECT button to expand the image size. And press the Point buttons to pan the image. The Panning function can work only when the image is larger than the screen size. Remote Control POINT buttons SELECT button D . ZOOM + button D . ZOOM - button Digital zoom ­ When D. ZOOM ­ () is pressed, the On-Screen Menu disappears and the message "D. Press the D. ZOOM or the SELECT button to compress image size. To exit the Digital zoom +/­ mode, press any button except the D. ZOOM buttons, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment or select an input source from the Input Source Selection (p. 5) again, or adjust the screen size with the D. ZOOM buttons. Note: · The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p. 9) · The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working. · True, Full, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 6). [. . . ] When the projector is cooled down enough and the temperature returns to normal, the POWER indicator lights red and the projector can be turned on. (The WARNING indicator keeps blinking. ) Check and clean the air filters. The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. [. . . ]