User manual SANYO PLC-ZM5000

[. . . ] Multimedia Projector MODEL PLC-ZM5000 Network Supported Refer to the Owner's Manual below for details about network function. Network Set-up and Operation PLC-ZM5000L Projection lens is optional. Owner's Manual Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1. 07 billion colors, and matrix liquid crystal display (LCD) technology. This projector employs WUXGA LCD panels with 1, 920x1, 200 pixels, allowing it to project high resolution signals at their native resolution. [. . . ] . . . . . . . . . . . . . . . Prohibit the shutter operation from the side control. . . . . . . . . . . . . . . . Prohibit the shutter operation from both the remote control and the projector's side control. Shutter Release key By using the Release function from the following options, the Shutter can be released when it stays activated (i. e. ) Any . . . . . . By pressing any button on the projector's side control or the remote control, the shutter can be released when it is closed, and meanwhile the function of the selected item will come into effect. MUTE SHUTTER. . . Only by pressing the SHUTTER button on the projector's side control or the remote control the shutter can be released when it is closed. In addition, when the Shutter is functioning, only the following buttons are active: -- INPUT button and ON/STAND-BY button on the projector's side control -- INPUT 1/2/3 buttons and STAND-BY button on the remote control Note: Management The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 480 minutes. When the countdown time has elapsed, the shutter will be opened up automatically and the lamp will be turned off to cool itself down. The SHUTTER indicator is blinking blue during this cooling-off period. When the lamp has been fully cooled down, the POWER indicator turns green lighting and the SHUTTER indicator keeps blinking. Should the ON / STAND-BY button be pressed in this condition, the projection lamp will be turned on and the SHUTTER indicator turns off. Note: 63 Setting Closed caption Closed caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains Closed captions, you can turn on the feature and switch the channels. Press the Point buttons to select Off, CC1, CC2, CC3 or CC4. If the Closed caption is not clear, you can change the text from Color to White. Closed caption Note: NTSC Auto NTSC Auto Closed caption Video delay control When you want to make a digital processing of a projected image faster, set this function. Low Mid High High Keystone Progressive Noise reduction Noise Low Press the Point buttons to select Off, CC1, CC2, CC3 or CC4, and then Press Select button. Keystone Progressive reduction Fig. 1 Video delay : On 64 Setting Filter counter This function is used to set a frequency for the filter replacement. Filter counter. . . . . . Show the total accumulated time of the filter use timer setting. Timer. . . . . . . . . . . . . . . To set a timer, when the projector reaches the time, the Filter replacement icon (Fig. 1) appears on the screen and the total accumulated time turns red, indicating that the filter replacement is necessary. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 2 appears on the screen, indicating that the filter cartridge replacement is necessary. Filter counter reset. . . When replacing the Filter cartridge, reset the Filter counter and the Scroll remaining (p. 68). Scrolls remaining. . . When the filter scroll is counted down to 1, Scroll remaining on the screen is showing 0 scroll(s) , the last scroll icon (Fig. 3) appears on the screen. When the filter scroll is counted down to 0, the Filter cartridge replacement icon (Fig. 4) appears on the screen and the WARNING FILTER indicator lights orange, indicating that the filter cartridge replacement is necessary. Scroll counter Reset. . . When replacing the Filter cartridge, reset the Filter counter and the Scroll remaining (p. 68). [. . . ] If it is in the standby mode, the setting is not effective to the projector. To control the projector with a web browser, the projector must be in the powered-on condition. Q Why does it sometimes take a lot of time to complete the page display?A The display speed of the page depends on the network environment in which both the projector and computer are placed. It may take much time to complete the page display if network traffic is heavy. [. . . ]