User manual SANYO PLC755M

[. . . ] (See page 42. ) Compatibility The projector widely accepts various video and computer input signals including; Computers, 6 Color systems, Component video, S-video and RGB scart. Blackboard Function Blackboard can be used as a projection screen. The board color is limited to Green. (See page 29 and 35. ) Simple Computer System Setting The projector has the Multi-scan system to conform to almost all computer output signals quickly. PLC-XU48 accepts signals up to UXGA resolution. (See page 25, 55. ) Film Function The Film function reproduces pictures faithful to the original film quality from 3:2 pull-down video contents. (See page 37. ) Digital Zoom (for Computer) The digital zoom function expands (to approx. [. . . ] It is displayed at 5 : 4 aspect ratio with this function off. Press the SELECT button at the Display area icon and the Display area dialog box appears. Display area Reset Resets all adjustment to their previous levels. Store To store adjustment data, move the red frame pointer to the Store icon and then press the SELECT button. Move the red arrow pointer to any of Mode 1 to 5 in which you want to store and then press the SELECT button. Mode free To clear adjustment data previously set, move the red frame pointer to the Mode free icon and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button. Quit Exits the PC Adjust Menu. Vacant Mode To store adjustment data This Mode has parameters being stored. shows values of "Total dots, " "Horizontal, " "Vertical, " "Display area H, " and "Display area V. " To clear adjustment data closes this dialog box. Note: Auto PC Adjust, Display area, Display area (H/V), and Full screen cannot be selected when "480i", "575i", "480p", "575p", "720p", "1035i", or "1080i" is selected in the PC System Menu (p25). 28 Computer Input Image Level Selection Direct Operation Select an image level among Standard, Real, Blackboard(Green), Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. Blackboard(Green) Picture level suitable for the image projected on a blackboard (Green). This mode assists to enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Quit Closes the Image Adjust Menu. Store icon Press the SELECT button at this icon to store the adjustment. Press the Point 7 8 button to adjust value. Image Level Menu Move the red frame pointer to any of Image 1 to 4 where you want to set and then press the SELECT button. 30 Computer Input Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. 1 2 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Screen Menu icon. Press the Point d button and move the red frame pointer to the function that you want to select and then press the SELECT button. Screen Menu Screen Menu icon Move the red frame to the function and press the SELECT button. Normal Provides image to fit screen size. True Provides image in its original size. When the original image size is larger than the screen size (1024 x 768), this projector enters "Digital zoom +" mode automatically. Wide Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9. Digital zoom + When the Digital zoom + is selected, the On-Screen Menu disappears and the message "D. Press the SELECT button to expand the image size. And press the Point ed7 8 button to pan the image. [. . . ] (The WARNING indicator keeps blinking. ) Check and clean the Air filter. The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. Check and clean the air filters. The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. [. . . ]