User manual SANYO PLCXP57L

[. . . ] Multimedia Projector MODEL PLC-XP57L Projection lens is optional. Owner's Manual TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in better condition for a considerable time. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents. [. . . ] When the image has a dark bars, try this adjustment. Display area H Adjusts the horizontal area displayed by this projector. Press the POINT LEFT/RIGHT buttons to decrease/increase the value. Display area V Adjusts the vertical area displayed by this projector. Press the POINT LEFT/RIGHT buttons to decrease/increase the value. Press the SELECT button at the Current mode icon to show information of the computer connected. Press the SELECT button at this icon to display the previous items. Press the POINT LEFT/RIGHT buttons to adjust the value. Press the SELECT button at this icon to adjust "Clamp, " "Display area H, " or "Display area V. " Current mode 27 COMPUTER INPUT Reset To reset the adjusted parameters, select Reset and press the SELECT button. All the adjustments return to their previous figures. Mode free To clear adjusted parameters previously set, move the red frame pointer to the Mode free icon and then press the SELECT button. Move the red arrow pointer to a Mode that you want to clear and then press the SELECT button. Store To store the adjusted parameters, move the red frame pointer to the Store icon and then press the SELECT button. Move the red arrow pointer to any of the Mode 1 to 10 in which you want to store the parameters and then press the SELECT button. Quit Exit the PC ADJUST Menu. Vacant Close this dialog box. To store adjustment data. This Mode has parameters being stored. Shows the values of "Total dots, " "Position H, " "Position V, " "Display area H, " and "Display area V. " A confirmation box appears and then select [Yes]. To clear adjustment data. Close this dialog box. A confirmation box appears and then select [Yes]. 28 COMPUTER INPUT PICTURE IMAGE SELECT IMAGE LEVEL SELECT DIRECT OPERATION Select an image level from among Standard, Real, and Image 1 to Image 10 by pressing the IMAGE button on the top control or on the remote control. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~10 User preset picture adjustment in the IMAGE ADJUST Menu. (p. 3537) IMAGE button Standard Real Image 1 Image 10 MENU OPERATION 1 2 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE SELECT Menu icon. Press the POINT UP/DOWN buttons to move the red frame pointer to the desired level and then press the SELECT button. Standard IMAGE SELECT MENU IMAGE SELECT Menu icon Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~10 User preset picture adjustment in the IMAGE ADJUST Menu. [. . . ] Ampere), 50/60 Hz (Continental Europe and The U. K. ) 41 °F ~ 95 °F (5 °C ~ 35 °C) 14 °F ~ 140 °F (-10 °C ~ 60 °C) Power Source Operating Range Dimensions Net Weight Laser Pointer : : : : : AA or LR6 ALKALINE Type x 2 16. 4' (5 m) / ± 30° 2. 0" x 1. 4" x 7. 6" (50 mm x 36 mm x 193 mm) 0. 35 lbs (160 g) (including batteries) Class II Laser (Max. Output: 1mW/Wave length: 650±20nm) Operating Temperature Storage Temperature Remote Control Transmitter Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries VGA Cable USB Cable Control Cable for Serial Port Lens Attachment Lens Replacement And Installation Manual PIN Code Label Specifications are subject to change without notice. LCD panels are manufactured to the highest possible standards. Even though 99. 99% of the pixels are effective, a tiny fraction of the pixels (0. 01% or less) may be ineffective by the characteristics of the LCD panels. [. . . ]