User manual SANYO PLV-HD10

[. . . ] Multimedia Projector MODEL PLV-HD10 Projection lens is optional. Owner's Manual TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. [. . . ] Press POINT UP/DOWN button and move a red frame pointer to Screen and then press SELECT button. Press POINT UP/DOWN button to move a red arrow to level that you want to set and then press SELECT button. Full DISPLAY ADJUST MENU DISPLAY ADJUST Menu icon Set a red frame pointer to item and press SELECT button. Provides image to fit the horizontal size of the screen size. Normal Provides image in its original size. Anamorphic Provides image is forcibly changed to a 4:3 image, even if the input signal is HDTV. SCREEN ADJUSTMENT (DIRECT) Select screen by pressing Screen button on Remote Control Unit. Full Normal Anamorphic Aspect H Aspect V These adjust the horizontal and vertical scale and position of the screen. When a SELECT button is pressed, the mode changes to Scale or Position adjustment mode. Use the POINT LEFT/RIGHT button(s) to select whether you wish to adjust Scale or Position, and then use the POINT UP/DOWN button(s) to adjust the values. 28 DISPLAY ADJUST AUTO PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. DISPLAY ADJUST MENU 1 2 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to DISPLAY ADJUST Menu icon. Press POINT DOWN button to move a red frame pointer to AUTO PC Adj. icon and then press SELECT button twice. This Auto PC Adjustment can be also executed by pressing AUTO PC ADJ. button on Side Control or on Remote Control Unit. DISPLAY ADJUST Menu icon Set a red frame pointer to item and press SELECT button. Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode in SYSTEM SELECT Menu (P26). Refer to step 3 of MANUAL DISPLAY ADJUSTMENT section (P31). NOTE G Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When image is not provided properly through this function, manual adjustments are required. (Refer to page 30, 31. ) G Auto PC Adjustment function cannot be operated in Digital Signal input on DVI terminal and "480i", "575i", "480p", "575p", "720p (HDTV)", "1035i (HDTV)", "1080i/50 (HDTV)" or "1080i/60 (HDTV)" is selected on SYSTEM SELECT Menu (P26). 29 DISPLAY ADJUST MANUAL DISPLAY ADJUSTMENTS This projector can automatically tune to display signals from most computers and video equipments currently distributed. However, some computers and video equipments employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector. If this happens, projector cannot reproduce a proper image and image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. [. . . ] When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp Replace Counter after replacement of the lamp. 45 APPENDIX MENU TREE Input Input 1 SDI 1 SDI 2 SYSTEM 3) SYSTEM 3) SYSTEM 1) SYSTEM 2) SYSTEM 1) SYSTEM 2) SYSTEM 1) SYSTEM 2) Input 2 RGB Y, Pb/Cb, Pr/Cr Input 3 RGB (Analog) RGB (Scart) RGB (PC Digital) RGB (AV HDCP) Display adjust System 1) Screen Full Normal Anamorphic SVGA 1 SVGA 2 SVGA 3 Custom Aspect V Aspect H Scale -32 ~ 32 Position -15 ~ 15 Scale -32 ~ 32 Position -15 ~ 15 Auto PC Adj. System 2) Fine sync Auto 1080i/60 1080i/50 1035i 720p 575p 480p 575i 480i Custom Display area Total dots Horizontal Vertical 0 - 31 640 x 480 720 x 400 800 x 600 1024 x 768 1152 x 864 1280 x 720 1280 x 1024 1600 x 1200 1920 x 1080 Quit System 3) 480i 575i 1035i 1080i/60 1080i/50 720p 1080p/30 1080psf/30 Custom Display area H Display area V Current mode Clamp Reset Mode free Store Quit Yes/No Yes/No Mode 1 ~ Mode 20 Quit 46 APPENDIX Image adjust Image Standard (AV) Cinema Standard (PC) Real Image 1 ~ Image 10 Quit Setting Language English German French Italian Spanish Portuguese Dutch Swedish Russian Chinese Korean Japanese Quit Contrast Brightness Color Tint Color temp. Red Green Blue Sharpness Detail enhancer Gamma Noise reduction Progressive Auto picture control Auto lamp control Reset Store 0 - 63 0 - 63 0 - 63 0 - 63 XLow/Low/Mid/High 0 - 63 0 - 63 0 - 63 0 - 15 0 - 15 0 - 15 Off/L1/L2/L3 Off/On Off/L1/L2 Off/On Yes/No Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 Image 8 Image 9 Image 10 Quit On start Remote control code Lamp mode Blue back Display Menu size Menu position Logo Ceiling Rear Power management 4 Lamp/2 Lamp On/Off On/Off Normal/Double On/Off On/Off On/Off Off/Ready/Shut down 1 ~ 30 minutes Quit On/Off Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Quit Quit Key lock Off Control panel Remote control Lamp counter reset Lamp 1 Lamp 2 Lamp 3 Lamp 4 Yes/No Yes/No Yes/No Yes/No Sound Volume Treble Bass Built-in SP. Mute Quit 0 - 63 0 - 63 0 - 63 On/Off On/Off Quit Factory default Quit Yes/No 47 APPENDIX TECHNICAL SPECIFICATIONS Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System High Definition TV Signal Motorized Lens Shift Scanning Frequency Horizontal Resolution Projection Lamp Input 1 Jacks Input 2 Jacks Input 3 Jacks Other Jacks Built-in Speakers Remote Control Transmitter Multi-media Projector 22. 9" x 10" x 30. 9" (581 mm x 252 mm x 783 mm) 83. 9 lbs (38 kg) 1. 65" TFT Active Matrix type, 3 panels 1920 x 1080 dots 6, 220, 800 (1920 x 1080 x 3 panels) PAL, SECAM, NTSC, NTSC4. 43, PAL-M and PAL-N 480i, 480p, 575i, 575p, 720p, 1035i, 1080i-50 and 1080i-60 Up, Down, Left and Right H-sync. [. . . ]