User manual SANYO PLV-HD2000

[. . . ] Multimedia Projector MODEL PLV-HD2000N/E Projection lens is optional. Owner's Manual TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in better condition for a considerable time. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents. [. . . ] Move a red arrow pointer to Mode that you want to clear and then press SELECT button. Reset Reset all adjust parameters on adjustment dialog box to previous figure. To store adjustment data. Terminal board and System of input signal. Shows values of "Total dots" "Display area H" and "Display area V". Vacant Mode Store icon Close this dialog box. Press POINT LEFT/RIGHT buttons to display left/right page. To clear adjustment data. Shows values of scale and position of "Aspect H" and "Aspect V" . This Mode has parameters being stored. Press POINT UP/DOWN buttons to display next/previous page. Mode free icon 32 DISPLAY ADJUST IMAGE ADJUSTMENTS IMAGE LEVEL SELECT (DIRECT) Select image level among Standard (AV), Cinema, Standard (PC), Real and Image 1 ~ Image 10 by pressing IMAGE button on Side Control or on Remote Control Unit. Select image level Image 1 ~ Image 10 by pressing IMAGE 1 ~ IMAGE 10 buttons on Remote Control Unit. Standard (AV) Normal picture level preset on this projector for AV mode. Cinema Picture level adjusted for picture with fine tone. Standard (PC) Normal picture level preset on this projector for PC mode. Real Picture level with improved halftone for graphics. IMAGE 1~10 User preset picture adjustment in IMAGE ADJUST Menu (P34-37). Image 1 Image 10 IMAGE button Standard (AV) Cinema Image 10 Standard (PC) Real IMAGE 1 ~ IMAGE 10 buttons Image 1 IMAGE LEVEL SELECT (MENU) 1 2 3 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE ADJUST Menu icon. Press POINT UP/DOWN button to move a red frame pointer to image icon and then press SELECT button twice. Press POINT UP/DOWN button to move a red arrow to level that you want to set and then press SELECT button. IMAGE ADJUST MENU IMAGE ADJUST Menu icon Move a red frame pointer to item to be selected and then press SELECT button twice. Standard (AV) Normal picture level preset on this projector for AV mode. Cinema Picture level adjusted for picture with fine tone. Standard (PC) Normal picture level preset on this projector for PC mode. Real Picture level with improved halftone for graphics. IMAGE 1~10 User preset picture adjustment in IMAGE ADJUST Menu (P34-37). 33 DISPLAY ADJUST IMAGE LEVEL ADJUSTMENTS 1 2 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. Press POINT UP/DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. [. . . ] 1. ) Turn the projector on and operate Lens shift, Zoom and Focus fully to check Light-Block Sheets. If Light-Block Sheets interfere with those operations, check Light-Block Sheets are set properly. 8 9 10 Slide both upper sides of LIGHT BLOCK Sheets in between 1 and 2 . 1 CABINET FLAP Slide into front of the flap. UPPER LENS COVER 2 GUIDE LIGHT-BLOCK SHEETS FLAP LOWER LENS COVER Slide into front of the flap. Fig-9 -5- FOCUS ADJUSTMENT (For Model LNS-W03) Set up the projector and project image on the screen. Loosen the Focus Lock Screw on the projection lens. [. . . ]