User manual SANYO PLV60HT

[. . . ] Multimedia Projector MODEL PLV-60HT Owner's Manual TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. [. . . ] Once parameters are memorized, setting can be done just by selecting Mode in SYSTEM Menu (above). Refer to step 3 of MANUAL PC ADJUSTMENT section (P26). NOTE : Auto PC Adjustment function cannot be operated when "RGB, " "HDTV720p, " "HDTV1035i" or "HDTV1080i" is selected on SYSTEM Menu (P23, 24). 24 COMPUTER MODE MANUAL PC ADJUSTMENT This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by MultiScan system of this projector. If this happens, projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. Note : This PC ADJUST Menu cannot be operated when "RGB" is selected on SYSTEM Menu (P23, 24). 1 2 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to PC ADJUST Menu icon. Press POINT DOWN button to move a red frame pointer to the item that you want to adjust and then press SELECT button. Press POINT LEFT/RIGHT button to adjust the value. Fine sync PC ADJUST MENU PC ADJUST Menu icon Move the red frame icon to the item and press SELECT button. Adjust the picture as necessary to eliminate flicker from the display. Press POINT LEFT/RIGHT button to adjust value. (From 0 to 255. ) Total dots The number of total dots in one horizontal period. Press POINT LEFT/RIGHT button(s) and adjust number to match your PC image. Horizontal Adjust horizontal picture position. Press POINT LEFT/RIGHT button(s) to adjust the position. Vertical Adjust vertical picture position. Press POINT LEFT/RIGHT button(s) to adjust the position. Current mode Press SELECT button to show the information of computer selected. Total lines The number of the total horizontal lines. Press POINT LEFT/RIGHT button(s) and adjust number to match your PC image. [. . . ] q When turning projector on, it takes about 30 seconds to display the image. q Check the system that you select is corresponding with the computer or the video equipment. q Make sure the temperature is not out of the Operating Temperature (5°C ~ 35°C). q Check audio cable connection from audio input source. [. . . ]