User manual SANYO PLVZ1BL

[. . . ] Multimedia Projector MODEL PLV-Z1 PLV-Z1BL Owner's Manual Table of Contents Table of Contents To the Owner Safety Instructions Compliance Feature and Design 2 3 4 6 8 Video Input Input Source Selection (Direct Operation) Input Source Selection (Menu Operation) Video System Selection (Video/S-Video) Video System Selection (Y-Pb/Cb-Pr/Cr) Image Level Selection (Direct Operation) Image Level Selection (Menu Operation) Image Level Adjustment Screen Size Adjustment (Direct Operation) Screen Size Adjustment (Menu Operation) 24 24 25 26 26 27 27 28 30 30 Computer Input / (RGB Scart 21-Pin Video Input) 31 Input Source Selection (Direct Operation) Input Source Selection (Menu Operation) Computer System Selection Compatible Computer System Computer Adjustment (Auto) (Direct Operation) Computer Adjustment (Auto) (Menu Operation) Computer Adjustment (Manual) Image Level Selection (Direct Operation) Image Level Selection (Menu Operation) Image Level Adjustment Screen Size Adjustment (Direct Operation) Screen Size Adjustment (Menu Operation) 31 31 32 33 34 34 35 38 38 39 41 41 Part Names and Functions Front Bottom Back Terminal Top Controls and Indicators Remote Control Remote Control Batteries Installation Operating Range 9 9 10 10 11 12 13 14 14 Setting Setting 42 42 Installation Positioning the Projector Tilting the Projector Moving the Lens Connecting to Video Equipment Connecting to a Computer 15 15 15 16 17 18 Appendix Lamp Replacement Lamp Replace Counter Warning Temp. Indicator Air Filter Care and Cleaning Cleaning the Projection Lens Troubleshooting Indicators and Projector Condition Technical Specifications Dimensions Configuration of Terminals Optional Parts 44 44 45 46 46 46 47 48 49 50 51 51 Basic Operation Turning On the Projector Turning Off the Projector Focus Adjustment Zoom Adjustment Keystone Adjustment No Show Function On-Screen Menu Contents of Menus 19 19 19 20 20 21 21 22 23 TRADEMARKS G Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. G IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. G Windows and PowerPoint are registered trademarks of Microsoft Corporation. [. . . ] Select "Yes" with the SELECT button. Select the Store. 4 Choose one of the positions from Image Level 1 to 4 where you want to store with the POINT UP/DOWN button, and press the SELECT button. Select "Yes" with the SELECT button and close the menu by pressing the SELECT button at the Quit. NOTE All the items on the next page can be memorized in Image 1-4. 28 Video Input The items that you can adjust are the following: Contrast Press the POINT LEFT button to decrease contrast and the POINT RIGHT button to increase contrast. (From 0 to 63. ) Brightness Press the POINT LEFT button to adjust image darker and the POINT RIGHT button to adjust image brighter. (From 0 to 63. ) Color Press the POINT LEFT button to lighten color and the POINT RIGHT button to deepen color. (From 0 to 63. ) Tint Press the POINT LEFT button or the POINT RIGHT button to obtain proper color. Press the POINT LEFT button or the POINT RIGHT button for Color temp. (XLow, Low, Mid, or High) White balance (Red) Press the POINT LEFT button to lighten red tone and the POINT RIGHT button to deepen red tone. (From 0 to 63. ) White balance (Green) Press the POINT LEFT button to lighten green tone and the POINT RIGHT button to deepen green tone. (From 0 to 63. ) White balance (Blue) Press the POINT LEFT button to lighten blue tone and the POINT RIGHT button to deepen blue tone. (From 0 to 63. ) Sharpness Press the POINT LEFT button to soften the image and the POINT RIGHT button to sharpen the image. (From 0 to 15. ) Gamma Press the POINT LEFT button or the POINT RIGHT button to obtain better balance of contrast. (From 0 to 15. ) Auto grayscale When this function is "ON", it automatically enhances contrast of bright and dark part of image. Auto fleshtone When this function is "ON", it produces more vivid image according to image condition. Reset Reset all adjustment before the data is stored. (The Reset does not work for the stored data. ) Store Store the adjustment data. Quit Close the Image Level Adjustment menu. NOTE : Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M or PAL-N. 29 Video Input Screen Size Adjustment (Direct Operation) Select the screen size among Full, Zoom, and Normal by pressing the SCREEN button on the remote control. (See the next section "Screen Size Adjustment (Menu Operation)" about each item. ) SCREEN button Full Zoom Normal SCREEN button LIGHT AUTO PC ADJ. AUTO MENU SCREEN SELECT Screen Size Adjustment (Menu Operation) This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press the MENU button, and the main menu appears. Select the Screen Size Adjustment menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. NOTE : The Screen Size Adjustment cannot be operated when "720p, " "1035i, " or "1080i" is selected in the Video System Selection menu (p26). Screen Size Adjustment menu Screen Size Adjustment menu 2 Choose the item that you want to set with the POINT UP/DOWN button, and then press the SELECT button to activate it. Press the SELECT button at this icon to activate the item. Full Provides an image to fit width of screen by expanding the image width uniformly. This function can be used for providing a squeezed video signal at wide video aspect ratio of 16 : 9. When your video equipment (such as DVD) has 16 : 9 output mode, select 16 : 9 and select the Full on this Screen Size Adjustment menu to provide better quality. [. . . ] G Make sure there is nothing between the Infrared Remote Receiver and remote control. G Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16. 4' (5m). G Make sure the code of the remote control is set to conform to the projector. [. . . ]