User manual SANYO POA-CH-EX06

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SANYO POA-CH-EX06. We hope that this SANYO POA-CH-EX06 user guide will be useful to you.

Lastmanuals help download the user guide SANYO POA-CH-EX06.

Download

You may also download the following manuals related to this product:

SANYO POA-CH-EX06 INSTALLATION (2686 ko)

Manual abstract: user guide SANYO POA-CH-EX06

Detailed instructions for use are in the User's Guide.

 [. . . ] 7

Attach the drop-prevention wire to the projector . 11

Be sure to consult with a qualified installation specialist. 
This installation manual describes how to mount the projector to a wall using the setting plate (model POA-CH-EX06).  [. . . ] Confirm the weight of the projector and the setting plate before installation,  and check the strength of the wall. If the wall is not strong enough,  reinforce the wall before installation. 

List of Accessories
r q

e w

t

y

u

i

o

!0

!2

!1

q Wall plate . 2 (3 mm. . . 1,  6 mm. . . 1) y Screws M4 x 18 mm
(for securing projector and adjustment unit). 5 (for securing setting plate and wall plate) . 4

i M5 x 10 mm hexagon socket head cap bolt

(for securing cover plates) . 2 2 1 1 1

o Strap for binding cables . !1 Template sheet for installing the wall plate . . 

u M8 x 20 mm hexagon socket head cap bolt

3

Installation Procedure
Install the wall plate to the wall
¡ From the projection distance table (page 10) and dimensions (page 11),  confirm the screen size and the distance between the projection surface and wall plate. ¡ The wall plate and the projection surface have different vertical center lines. Align the CTR line (printed on the template sheet) with the center line of the projection surface as shown in the illustration. ¡ Confirm where the beams are within the wall,  0. 27 inch 0. 65 inch (68 mm) (164 mm) and shift the position vertically or left and right as necessary. 
CTR line Center line of the wall plate Template sheet for installing the wall plate Center line of the projection surface

D

H Projection surface

2 3 4 5

Attach the template sheet to the wall. Make mounting holes in the wall in the required locations. Mount the wall plate on the wall. 
Unit: inch (mm) 1. 06 (27) 0. 51 x 1. 30 (13 × 33) 1. 77 x 3. 15 (45 × 80)

8. 82 (224) 15. 99 (406) 18. 23 (463) ¡ When you install the projector to the wall with the setting plate,  the wall needs to be strong enough to hold the projector and the setting plate. Confirm the weight of the projector and the setting plate before installation,  and check the strength of the wall.  [. . . ] ¡ Tighten the two bolts q which were loosened using the hexagon wrench (3 mm). 

Bolts q

Adjustment knob w

5°

5°

* "A" marks appear on the setting plate to indicate the locations of the bolts and adjustment knob. 

7

Installation Procedure

4

Adjust the vertical tilt (Adjustable range: +5° - ­5°)
¡ Loosen the screw q located on the left side of the setting plate using the hexagon wrench (3 mm). ¡ Turn the adjustment knob w located on the left top side of the setting plate to adjust the vertical tilt.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SANYO POA-CH-EX06

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SANYO POA-CH-EX06 will begin.