User manual SANYO POA-RCKIT04

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. [. . . ] Connect the Presentation Remote Receiver to the USB port of your computer. Install the batteries into the Remote Control by following the instructions below. Presentation Remote Control Note: · The Presentation Remote Receiver can be connected to a standard USB port only. · Some computer settings may have to be changed in order for the mouse function to be used. Refer to your computer's owner's manual for details. · When switching the remote control code of the projector and the remote control, that of the presentation remote control also needs to be switched. To switch the code, press and hold both the MENU and IMAGE buttons for more than 10 seconds. (For details, refer to the owner's manual of the projector. ) Presentation Remote Receiver Computer cable 30° 16. 4' (5 m) Presentation Remote Receiver and Projector's IR Receiver. 30° Remote Control Battery Installation 1 Open the battery compartment lid. 2 Install new batteries into the compartment. Two AAA size batteries For correct polarity (+ and ­), be sure battery terminals are in contact with pins in the compartment. 3 Replace the compartment lid. To insure safe operation, please observe the following precautions: Use (2) AAA or LR03 type alkaline batteries. Do not use a new battery with a used battery. Do not expose the remote control to moisture or heat. If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2 Names and Functions of Each Button Presentation Remote Control performs the function of a wireless mouse to control the mouse cursor on the computer. For convenience while giving presentations, some buttons controlling the projector are also provided. For Presentation Aim the remote control at the Presentation Remote Receiver. q PAGE ed buttons Scroll back and forth the pages on the screen when giving presentations. w L-CLICK button Act as the left button on a computer mouse. To drag a selected item, press and hold the L-CLICK button and move the cursor with the Cursor button. e R-CLICK button Act as the right button on a computer mouse. For Projector ON - OFF w For Presentation e q !9 !8 COMPUTER VIDEO OMPUTER PAGE L-CLICK R-CLICK r r Cursor button Act as the cursor on a computer mouse. !7 !6 !5 !4 !3 MENU VOLUMESELECT VOLUME+ FREEZE D. ZOOM MUTE KEYSTONE t NO SHOW P - TIMER For Projector Aim the remote control at the IR Receiver of the projector. t NO SHOW button Temporarily turn off the image on the screen. [. . . ] !7 COMPUTER button Select COMPUTER input source. !8 POWER ON-OFF button Turn the projector on or off. !9 VIDEO button Select VIDEO input source. 3 English Specifications Remote Control Unit Power Source Operating Range Dimensions Net Weight AAA or LR03 type x 2 (included) 16. 4' (5 m) / ±30° 2. 0"(W) x 0. 91"(H) x 4. 8"(D) (51. 5 mm x 23. 2 mm x 123 mm) 2. 54 oz (72 g) (including batteries) Remote Control Receiver Transmission Signals Infrared Windows · Windows 98 / 2000/ Me / XP Compatible Computers Compatible with only full versions of Windows. [. . . ]