User manual SANYO RM-CD23

[. . . ] CONDENSATION If cold water is poured into a glass, water droplets form on the outside of the glass. Condensation may occur on internal operating parts of the laser pickup. CONDENSATION OCCURS: When the unit is brought from the SAFETY TIPS LASER SAFETY THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM, DESIGNED WITH BUILT-IN SAFEGUARDS. EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO THE HUMAN EYE. [. . . ] To backward skip and forward skip the track, Press the CD Skip/Search button ( or ) during play to skip to the desired track. Press the CD Forward Skip/Search button ( ) to skip to the next track on the disc. Press the CD Backward Skip/Search button ( ) to skip to the beginning of the track currently playing. n Press and hold the CD Skip/Search button ( or ) during play to scan the disc at high speed. When the desired section of the disc is found, release the buttons; normal play will resume. Press the Program/Repeat button during play: n Press once to repeat the track (song) currently played, The repeat indicator will come on. n Press twice to repeat all the tracks (songs) on the disc, The repeat indicator will flash on and off. n Press a third time to exit repeat play mode. RANDOM PLAY Tracks on the disc can be played in random order. After the current track is finished, the unit will play tracks in random order until all tracks are played, and then stop. During random play, the current track number and random symbol will flash repeatedly to indicate random play is in progress. PROGRAM PLAY PROGRAM BUTTON Tracks on the disc can be played in the desired pre-set order. Press the CD Program/Repeat button in stop mode. " " will be shown in the display. Select the desired track by using CD Skip/Search button ( or ). Press CD Program/Repeat button again to store the first track into memory. Repeat steps 2 to 3 to program additional tracks; up to 16 tracks can be programmed in sequence. Note: When the 10th track is programmed, the display shows " ". When more than 10 tracks are entered, the display will show , , , , and indicating11, 12, 13, 14, 15 and 16th track. Press the CD Play/Pause button to start the programmed play. The Display will show the track number being played, and the Play/Program indicator will remain flashing during programmed play. All tracks will play in the order you programmed. If in middle of play if you want to hear the next programmed track, press the Skip/Search button ( ). [. . . ] You also are responsible for the cost of any MAINTENANCE necessary in respect of the product. WARRANTY BECOMES VOID This warranty becomes void if the product's serial numbers are altered or removed or if any repair to the product is made other than by SANYO Canada Inc. or by an authorized Sanyo Service Depot. reserves the right to change or improve the design of the model of the product warranted hereunder without incurring any obligation to make any modifications to or to install any improvement in or on the product. [. . . ]