User manual SANYO SBM20

[. . . ] We are not responsible for any data losses or damages resulting from use of the Memory Viewer function. Trademarks Microsoft, Windows, and PowerPoint are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Each name of corporation or product in this owner's manual is either a registered trademark or a trademark of its respective corporation. · The On-Screen Menu and figures in this manual may differ slightly from the product. · The contents of this manual are subject to change without notice. Memory card for the Memory Viewer function The memory card is not provided with this projector. [. . . ] Select "Enter" and press SELECT button. The memory viewer start-up image appears briefly and an image stored in the SD memory card is displayed on the screen. * If the image file is not available in the root directory of the SD memory card, the memory viewer browser window appears. Memory viewer function Displaying the memory viewer browser window When you press AUTO SETUP/CANCEL button in the memory viewer mode, following browser window "Thumbnail" or "Filename list" appears on the screen. Thumbnail display Menu Displays current directory path Filename list display Displays current directory path Menu Moves to upper directory * When you set up the custom screen size with the screen setting of the projector, a part of the browser window of the memory viewer may get cut off from the custom screen size. In that case, readjust the custom screen size. Menu tree Menu Menu Sub menu Manual mode Description Mode to select a playing file respectively Available file types are JPEG(. jpg), Bitmap(. bmp), Text(. txt). Mode to select a program file (. dpf ) created by the program editor. Formats the SD memory card Displays files with the thumbnail on the browser window. Displays files with the file name on the browser window. Selects display menu language, Japanese or English. Set with 7 8 button Sets display period of an image in the auto display mode. (3 to 240 seconds) Set with point 7 8 button. Sets the repeating times in the auto display mode. Select a program file with point buttons and press SELECT button. The dialogue window appears and select "Yes" and press SELECT button to start the auto display. The images programmed by program file are displayed on the screen. The display period of the image and the number of repeat are set with the program file. During displaying the image, you can control the displayed image with control buttons as described in the table below. Point d e 8 7 Operation Manual playback with next file Manual playback with previous file Start auto-playback Stop auto-playback Termination of memory viewer To terminate the memory viewer function, take one of methods described below. - Terminate with projector's on-screen menu. 1. Select "Wired" or "Wireless" from the input menu of the projector. Select "Memory Viewer" with the point ed buttons and press SELECT button. The "Enter/Exit" pallet of the memory viewer appears. Select "Exit" and press the SELECT button. - Terminate with memory viewer mode 1. During the image displaying, press AUTO SETUP/CANCEL button. [. . . ] In that case, enter "user" into the User Name column and the network PIN code of the projector into the Password column. *User Name must be "user". 10 * The data converted by the Network Viewer 4 [File Converter1] can be stored into the SD memory card mounted on the projector directly. For further information, refer to chapter Network Viewer function, "Setting of output destination and conversion mode" (p. 113) described on the separated booklet of Network Owner's manual. * The program file created by the Program Editor can be stored into the SD memory card mounted on the projector directly. [. . . ]