User manual SANYO SRT-7072

[. . . ] INSTRUCTION MANUAL SRT-7072 English Français Español Real Time Video Recorder Enregistreur vidéo en temps réel Videograbador en tiempo real Please read this manual and accompanying "IMPORTANT SAFETY INSTRUCTIONS" sheet carefully before connecting your VCR and operating it for the first time. Be sure to read carefully and follow all the PRECAUTIONS on page 1. Keep the manual in a safe place for future reference. PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] ø The "SPD" (recording speed) position will start flashing. 2 Turn the JOG dial, until "SAT" is flashing. 3 Turn the SHUTTLE ring to set the desired start day of the week (ex: SAT), then turn the JOG dial clockwise. ø The recording start hour position starts flashing. G Turn the SHUTTLE ring to select the recording speed mode (ex: 40), then turn the JOG dial clockwise. ø "N" will start flashing. H Turn the SHUTTLE ring to select "Y". ---@N 4 Turn the SHUTTLE ring to set the recording start hour (ex: 21), then turn the JOG dial clockwise. ø The recording start minutes position starts flashing. 5 Turn the SHUTTLE ring to set the recording start minutes (ex: 00), then turn the JOG dial clockwise. ø The recording stop hour position starts flashing. I Follow steps F and G under "PROGRAM TIMER RECORDING" on page 20. 6 Turn the SHUTTLE ring to set "öö" for the recording stop hour. ø The rest of the line settings will change to "öö:öö ööö ö", the day of the next line will change to the next day and the start time will change to "öö:öö" automatically. 7 Turn the JOG dial clockwise. ø The day of the week of the 8th line is flashing. English 21 PROGRAM TIMER RECORDING Setting the Holidays By setting the holidays, timer recording will be conducted on those days, as set for Sundays. Changing a Program Timer Recording 1 Press the MENU button until the (TIMER SET) menu is displayed. 1 Press the MENU button until the (HOLIDAY SET) menu is displayed. ----- 2 Turn the JOG dial, until the setting to correct is flashing. 3 Turn the SHUTTLE ring, to correct the setting. 4 Press the SEARCH button to save the settings. 5 Press the TIMER button. 2 Turn the SHUTTLE ring to set the month of the holiday, then turn the JOG dial clockwise. To Cancel a Program Timer Recording 1 Press the MENU button until the (TIMER SET) menu is displayed. 3 Turn the SHUTTLE ring to set the day of the holiday. 4 Turn the JOG dial, until the next line to set starts flashing. ø Repeat steps 2 to 4 to set up to 20 holidays. 2 Turn the JOG dial, until the "Y" corresponding to the timer recording to cancel is flashing. 5 Press the SEARCH button to save the settings. ø The setting procedure is now completed. 3 Turn the SHUTTLE ring, to select "N". 4 Press the SEARCH button to save the settings. 5 Press the TIMER button. NOTE: oe If setting holidays, be sure that a timer recording is set for Sunday. oe If a timer recording for Sundays is entered, the holidays timer recording will not function if the program timer recording mode is set to "N". oe To erase a setting, follow the same procedure as above, but at step 2 and 3, enter "--" instead of a setting. To Cancel all Program Timer Recordings 1 Press the MENU button until the (TIMER SET) menu is displayed. 2 Press the MENU RESET button. ø All programmed timer recordings are erased. 3 Press the SEARCH button, the normal screen is displayed. 22 English PROGRAM TIMER RECORDING NOTES: oe During timer recording or timer recording stand-by, all the buttons on the VCR, except the TIMER button and the buttons to set/cancel the security lock (see page 30), are disabled. oe If the power fails, the recording will be interrupted. When the power is restored, the recording will resume if the stop time has not yet been reached, and "P" will be displayed on the digital display. The VCR internal battery is completely recharged after the VCR has been connected to a live outlet for 48 hours, and it will maintain all the VCR settings memory for up to 30 days. oe Set the timer recordings so that the recording times do not overlap. If they do, the one with the earliest recording start time will have priority. [. . . ] This is not a malfunction. System Down If the unit does not function at all, try the following. 1 Unplug the power cord then plug it back in. (Press the ALL RESET button. Under normal conditions, do not touch the ALL RESET button. ) 3 If the problem is not corrected after performing steps 1 and 2 a few times, consult your dealer. 40 English SPECIFICATIONS General Specifications Video heads system Dual-azimuth 4-head rotating helical scanning system: Dual azimuth 2-head for record and standard playback Dual azimuth 4-head for forward picture search, reverse picture search and still mode In 8-, 24- and 40-hour modes (when using T-160 tape) In 6-, 18- and 30-hour modes (when using T-120 tape) 11. 12 mm /sec (8-hour mode) VHS 1/2 inch video cassette tape 8, 24, 40, 64 and 96 hours (when using T-160 tape) 6, 18, 30, 48 and 72 hours (when using T-120 tape) approximately 3 minutes 30 seconds (when using T-160 tape) NTSC color TV system 19200, 9600, 4800, 2400 baud Audio recording Tape speed Specified video cassette tape Recording/playback time Fast forward/rewind time Television system RS-232C/RS-485 data transfer speed Video Recording method Video input Video output Horizontal resolution Luminance signal: FM recording Chrominance signal: Down-converted direct recording 1 V(p-p), BNC, 75 , unbalanced 1 V(p-p), BNC, 75 , unbalanced Black & white mode 350 line or more Color mode 300 line or more Audio Input Output Microphone input ­8 dBs, RCA pin jack, 27 k, unbalanced ­8 dBs, RCA pin jack, 600 , unbalanced ­60 dBs, 3. 5 mm mini jack, 10 k, unbalanced Connectors Alarm input Alarm output Switch output Tape end output Warning output Ext timer input Eject input Eject output Timer output Series input Series output/Non rec output Clock set input Clock set output Common Remote control input Low level active (0V 100msec or more) DC 5 V (±0. 5)/5. 7 k, Low at alarm DC 5 V (±0. 5)/5. 7 k, Low at switching DC 5 V (±0. 5)/5. 7 k, Low at tape end DC 5 V (±0. 5)/5. 7 k, Low at warning Low level active (0V 100msec or more) Low level active (0V 100msec or more) DC 5 V (±0. 5)/5. 7 k, Low at eject in DC 12 V (±0. 5)/5. 7 k, High at timer recording Low level active (0V 100msec or more) DC 5 V (±0. 5)/5. 7 k Low level active (0V 100msec or more) DC 5 V (±0. 5)/5. 7 k, Low at clock set in 0 V (GND) 3. 5 mm mini jack Other Specifications Operating temperature range Operating humidity range Power requirements Power consumption Dimensions Weight 5°C to 40°C 80% or less 120 V AC, 60 Hz 17 W 420 (W) x 99. 5 (H) x 295. 5 (D) mm approximately 4. 4 kg NOTE: The specifications and external appearance of this unit are subject to change without notice. English 41 SANYO INDUSTRIAL VIDEO VCR LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user's expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by writing to SFS Corporation, SFC's warranty administrator, at any of the addresses listed below, or by calling (toll-free) 1-800-421-5013. New Jersey Office 210 Riser Road Little Ferry, NJ 07643 201-641-3000 California Office 1200 W. [. . . ]