User manual SANYO VPC-CG10GX

[. . . ] A CompactFlash is not included with Model VPC-CG10GX. Warning TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE FOR AMERICAN USERS oe This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] (Aperture priority AE) Example: To open the aperture for portraits with a blurred background (for a shallow field depth), or to close the aperture for a clear foreground and background (for a deep field depth). : This allows you to set a specific shutter speed. The camera automatically sets an appropriate aperture size based on this setting. (Shutter speed priority AE) Example: To set a fast shutter speed for capturing a clear image of a fast-moving object, or to set a slow shutter speed to shoot the flow of a background scene. English 110 SETTING THE EXPOSURE CONTROL : This allows you to set a specific shutter speed and aperture size. (Manual exposure control) Example: When shooting in a dark location without using the flash, set the shutter to stay open for a longer time (slow shutter). When used for shooting nighttime scenes, you can capture lights flowing across the image. 3 Press the SET button. oe The screen corresponding to the exposure control mode selected in step 2 appears. <Aperture and shutter variable program AE > oe The setting changes to aperture and shutter variable program AE, and you are returned to the Shooting Setting Screen. <Aperture priority AE > oe The display to set the aperture size appears. oe Press [j] or [l] on the arrow button to set the desired aperture size. Tele: 4. 9 to 11. 8 Wide: 2. 7 to 6. 7 APERTURE 13 p j 4. 7 l SETTING <Shutter speed priority AE > oe The display to set the shutter speed appears. : Set the green hue, saturation and brightness. : Set the cyan hue, saturation and brightness. : Set the blue hue, saturation and brightness. : Set the magenta hue, saturation and brightness. : The hue, saturation and brightness settings are completed, and you are returned to the Color Adjustment Screen. C: The new settings are canceled, and you are returned to the Color Adjustment Screen. COLOR ADJUSTMENT R Y G C B M HUE 00 00 00 00 00 00 SAT 00 00 00 00 00 00 BR 00 00 00 00 00 00 HUE 00 00 00 00 00 00 SAT 00 00 00 00 00 00 BR 00 00 00 00 00 00 English 114 ADJUSTING THE COLOR TONES (REAL-COLOR EQUALIZER) 4 Adjust the color. 1 Press [j] or [l] on the arrow button to select a color icon ( to ) to adjust. 2 Press [d] or [c] to select the color property you wish to change (hue, saturation or brightness). 3 Press [j] or [l] to adjust the value of the selected color property. oe Adjust the hue while watching on the LCD monitor. oe Each property can be set within a maximum range of +50 to 50. [. . . ] Example: Using a Microdrive at an ambient temperature of 25C, resolution 2, compression rate D, and frame rate }, the continuous recording time will be about 20 minutes, due to the rising internal temperature. If the camera is used when the internal temperature is elevated, it is more likely for the S icon (warning indicator for elevated temperature) to appear, and the usable time of the camera to become shorter. (See "Cautions concerning high temperatures" on page 24. Cautions when using the Microdrive oe When using the Microdrive continuously, the card will become very hot. Be careful when touching the card for removal, etc. [. . . ]