User manual SANYO VPC-PD1PX

[. . . ] INSTRUCTION MANUAL Dual Camera VPC-PD1EX VPC-PD2 VPC-PD1GX VPC-PD1PX VPC-PD1TA Important note This manual explains how to safely operate the VPC-PD1EX, VPC-PD2, VPC-PD1GX, VPC-PD1PX and VPC-PD1TA. Any information regarding only one of these products will be labeled as such. Please read these instructions carefully before using the camera. Make sure to read and understand the separate booklet "SAFETY MANUAL". [. . . ] h To return to the Setup Menu, press the [?] button. Select an item to change SETUP VIDEO STABILIZER OPTICAL ZOOM CLOCK SET LANGUAGE TV OUTPUT FORMAT OK Press [I]/ [J] CLOCK SET Press SET button DATE TIME DISP 2010/07/01 00:00 D/M/Y OK <Setting Screen> 17 English SHOOTING SHOOTING VIDEO CLIP RECORDING 1 2 Turn on the camera (page 11). h It is not necessary to keep the [ ] button pressed while recording. h When the remaining recording time available for the currently recording clip becomes little, a countdown of the remaining recording time appears on the display. h Press the [ ] button again to stop recording. 2M [ ] button (Video recording button) SHOOTING 3 Recording time REC 00:09 5 Available recording time remaining English 18 HINT To change the video settings 1 With the Recording Screen displayed, press the [H] arrow key. h The screen to change the video settings appears. h To return to the Recording Screen without changing the settings, press the [?] button. VIDEO 1920x1080 30fps SHQ 2 Use the [G] and [H] arrow keys to select a setting, and press the SET button. h The video settings are changed, and you are returned to the recording screen. 19 English SHOOTING SINGLE SHOTS Capture a still image (single-shot). 1 2 Turn on the camera (page 11). h The autofocus operates, and the image is focused (focus lock). 2 Continue to gently press the [ ] button all the way. h The shutter releases and the image is captured. h You can view the captured image on the monitor by keeping the [ ] button depressed when you capture the image. [ ] button (Photo shooting button) SHOOTING ON/OFF button English 20 To change the photo settings 1 With the recording screen displayed, press the [G] arrow key. h The screen to change the photo settings appears. h To return to the recording screen without changing the settings, press the [?] button. PHOTO 4000x3000 2 Use the [G] and [H] arrow keys to select a setting, and press the SET button. h The photo settings are changed, and you are returned to the recording screen. To change the flash operation 1 While the Recording Screen is shown, press the [?] button. h The screen to select the flash operation appears. h To return to the Recording Screen without changing the setting, press the [?] button. FLASH AUTO 2 Use the [G] and [H] arrow keys to select the desired setting, and press the SET button. h The flash operation setting is modified, and you are returned to the Recording Screen. i The Setup Menu appears when the [?] button is kept pressed for at least 1 second. i Press the [?] button to cancel the Setup Menu, and then briefly press the [?] button again. 21 English HINT What is the camera focusing on?Target mark i A target mark & on the monitor shows the area the camera is focusing on. i The camera automatically determines the correct focus by measuring from 9 different focus points within the shooting area. [. . . ] Especially when used at temperatures below 10 °C (50 °F), the battery pack operation time is significantly reduced. APPENDICES English 44 Possible No. of Images/Possible Shooting Time/ Possible Recording Time Shooting/ recording mode Resolution setting w v u 1 t Y " & ) Internal Memory 21 images 25 images 50 images 124 images 124 images 53 sec. SD Memory Card 8 GB 2, 000 images 2, 390 images 4, 690 images 11, 300 images 11, 300 images 1 hr. 16 GB 3, 910 images 4, 670 images 9, 160 images 22, 700 images 22, 700 images 2 hr. [. . . ]