User manual SANYO VPC-S1070

[. . . ] INSTRUCTION MANUAL Digital Camera 10 Mega Pixels VPC-S1070 Preface i About this Manual This manual is designed to assist you in using your new digital camera. All information presented is as accurate as possible but is subject to change without notice. Copyright This manual contains proprietary information protected by copyright. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. © Copyright 2008 Federal Communications Commission (FCC) Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Press the right side of the Zoom button T 2. Press the left side of the Zoom button W to zoom in on your subject. to zoom out from your subject. Using the Self-timer and Burst Photography The camera comes equipped with a self-timer which allows you to take photos after a pre-defined delay. The burst photography feature allows you to take multiple consecutive photos by pressing and holding the Shutter button. The multi-burst photography feature allows you to take multiple (16) consecutive VGA photos by pressing the Shutter button once. Press the Right/Self-timer/Burst mode navigation button to cycle through the self-timer( or ) and burst photography options ( or ) on the LCD screen. Once you have selected an option, frame and take your shot. In self-timer mode, the icon will flash until the time expires and the photo is taken. After taking a photo, the Self-timer automatically exit. If you want to use these functions for the next photo, press the Right/Self-timer/Burst mode navigation button again to activate the function. Note: : Burst Mode Take photos until all free memory space is used. : Multi-Burst Mode 16 photos continuously by 1 press of the Shutter button. Taking your First Photo Getting Started 19 Using the AEB (Auto Exposure Bracketing) Function When using the AEB (Auto Exposure Bracketing) function, the camera automatically takes 3 consecutive photos with different exposures by pressing the Shutter button once. For example, when the current EV compensation value is +0. 3 EV and the AEB bracket interval value is set to ±0. 3, the camera takes shots of the same scene with 3 varying levels of exposure: 0 EV, +0. 3 EV, and -0. 3 EV. This function is only available in Auto and P-Mode modes. Press the MENU button to display menu options. Press the Left/Right navigation buttons to 0. 3EV BRACKET select AEB setting and press the OK button. Press the Up/Down navigation buttons to select from the available options: AEB · AEB: Select to enable (ON) or disable (OFF) the AEB function. · BRACKET: Select to set the bracket interval value ranging from ±0. 3 to ±2. 0 EV in 0. 3 or 0. 4 EV increments. · EXIT: Select to apply new settings to the camera and return to the setup menu. Note: 1. When taking AEB shots, hold the camera steadily. Flash, Burst, and M-Burst modes are not allowed when the AEB function is enabled. Taking your First Photo English 20 Getting Started Setting the Scene Mode English The camera supports various preset modes for shooting in different environments and conditions. Each setting is configured automatically by the camera. To select scene modes: Press the SCENE button to access Scene menu which displays the Scene menu options. [. . . ] Press the Up/Down navigation buttons again to select the paper size and press the OK button to enter. · DEFAULT SIZE · 4" x 6" · LETTER · A4 PAPER SIZE DEFAULT SIZE 4" X 6" LETTER A4 4. Press the Up/Down navigation buttons to Continue or Cancel the action and press the OK button to enter. Copies : 3 Prints : 3 Size : Default CONTINUE CANCEL PictBridge Print (PTP) Camera Settings 47 Index Print Use this function to print all images in index format. DEFAULT SIZE LETTER A4 INDEX PRINT 1/140 1. Press the Up/Down navigation buttons to select the Paper size and press the OK button to enter. [. . . ]