User manual SANYO VPC-S1080

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Its intuitive interface and easy-to-use wizard deliver great-looking panoramas while advanced warping, blending and alignment tools ensure excellent results. Insert the CD-ROM that came with the camera into your CD-ROM drive. Follow the on-screen instructions to complete the installation. EN-22 VIDEO MODE Recording Video Clips This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels. Press the MODE button, and set the camera mode to [w]. The recording of the video clip will start. Pressing the shutter button one more time will end the recording of the video clip. The recording time depends on the storage size and the subject of the image to be recorded. The zoom function cannot be used during video recording. When recording a video clip, the flash cannot be used. If the write speed of your SD/SDHC memory card is not fast enough for recording video clips in the currently selected size, and then the video recording will stop. In this case, select a video size lower than the current one. Playing Back Video Clips You can play back recorded video clips on the camera. Press the MODE button, and set the camera mode to [x]. Select the desired video clip with the [ /X buttons. A press of the X /[ buttons during playback allows fast forward play/fast reverse play. To stop video playback, press the button. This stops playback and returns to the start of the video clip. To pause video playback, press the SET/DISPLAY button. To cancel pause, press the SET/DISPLAY button again. Video clips cannot be displayed rotated or enlarged. This camera does not have a built-in speaker so that you can not play back sound with the camera. To play the video clip back on your computer, you may use either Windows Media Player or Apple "QuickTime Player". QuickTime basic player is available free of charge, compatible with Mac and Windows-computers and can be downloaded from the Apple web site at www. apple. com. For help using QuickTime Player usage, please refer to the QuickTime on-line help for more information. EN-23 PLAYBACK MODE Playing Back Still Images You can play back the still images on the LCD monitor. Press the MODE button, and set the camera mode to [x]. [. . . ] Connect the other end of the USB cable to the USB port on the printer. Select [Printer] with the / buttons, and press the SET/DISPLAY button. Printing images When the camera is properly connected to a PictBridge compliant printer and set to [Printer], the PictBridge menu is displayed on the monitor. Select the item you want to configure with the / buttons, and press the SET/ DISPLAY button. [. . . ]