User manual SANYO VPC-S1285

[. . . ] INSTRUCTION MANUAL Digital Camera Please read these instructions carefully before using the camera. Keep this manual in a safe place for later reference. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. [. . . ] Press the button again to switch back to album shot preview display. This shot can only be recorded if there are 3 shots recorded in each of the available frames. EN-22 Recording Shots using Face Detection Technology Face Detection Technology can identify and focus on the human faces in the image. This advanced function simultaneously detects up to 10 human faces regardless of their position in the scene. Press the button, and set the camera mode to [ ]. Press the button, and select [ ] icon with the / buttons. With Face Detection turned on, the camera identifies main face (white frame) and subsidiary faces (gray frames). If the camera cannot detect and track any faces, there will be no frame shown on the screen. Press the shutter button halfway down to lock the focus. When the main face is in focus, the white frame simultaneously turns green. Press the shutter button down fully to capture your image. Focus lock Subjects that are not suitable with this function: a. A person is wearing glasses, sunglasses, or face is covered with hat or hair. A person turns sideways. Self-portrait Function Use this function to take pictures of yourself or include yourself in pictures. Press the button, and set the camera mode to [ ]. Press the button, and select [ ] icon with the / buttons. Press the shutter button down fully to activate this function. The camera identifies main face (white frame) and subsidiary faces (gray frames) automatically. When the main face is in focus, the white frame simultaneously turns green. If the camera cannot detect and track any faces, there will be no frame shown on the screen. If it does not detect any face within 30 seconds, the camera will automatically capture an image and return to preview display. After twice blinking of the self-timer LED, one image will be captured. The camera will return to self-portrait preview to detect face. [. . . ] Select [PictBridge] with the / buttons, and press the button. Printing images When the camera is properly connected to a PictBridge compliant printer, the PictBridge menu is displayed on the monitor. Select the item you want to configure with the / buttons, and press the button. [Images]:Select whether you want to print specific image or all images. [. . . ]