User manual SANYO VPC-S670R

[. . . ] INSTRUCTION MANUAL Digital Camera 6 Mega Pixels VPC-S670 Preface i About this Manual This manual is designed to assist you in using your new digital camera. All information presented is as accurate as possible but is subject to change without notice. Copyright This manual contains proprietary information protected by copyright. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. © Copyright 2007 Federal Communications Commission (FCC) Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] When a camera steady warning icon appears, hold the camera as still as possible, as a longer exposure time (more than 1/30 second) is required. Anti-Shake Function This function is only available in Auto capture mode. Press the OK button to enable the AntiShake function, and press again to disable it. An Anti-Shake icon displays on the LCD screen when the function is activated. Using Macro Mode Macro mode is designed for close-up photography and can capture all detail even when your subject is very close to the camera. The Macro icon displays on the LCD screen. naviga- Setting the Flash Mode You can choose from four flash modes to suit various lighting conditions. Press the Up/Flash/Delete navigation button to scroll through the four modes on the LCD screen. The flash setting remains the same for subsequent photos until you change it as described above. Auto flash: The flash fires automatically when needed. Fill flash: The flash always fires. Taking your First Photo Getting Started 17 Anti Red-eye: The flash fires twice so as to reduce the red-eye effect. Using the Zoom in/out Function The camera comes equipped with 3x optical zoom and 5x digital zoom that allows you to zoom in on your subject. Press the right side of the Zoom switch T 2. Press the lefts side of the Zoom switch W to zoom in on your subject. to zoom out from your subject. Using the Self-timer and Burst Photography The camera comes equipped with a self-timer which allows you to take photos after a pre-defined delay. The burst photography feature allows you to take multiple consecutive photos by pressing and holding the Shutter button. The multi-burst photography feature allows you to take multiple (16) consecutive VGA photos by pressing the Shutter button once. Press the Right/Self-timer/Burst mode navigation button to cycle through the self-timer( or ) and burst photography options ( or ) on the LCD screen. Once you have selected an option, frame and take your shot. In self-timer mode, the icon will flash until the time expires and the photo is taken. After taking a photo, the Self-timer automatically exit. If you want to use these functions for the next photo, press the Right/Self-timer/Burst mode navigation button again to activate the function. Note: : Burst Mode Up to 3 photos continuously during pressing the Shutter button. : Multi-Burst Mode 16 photos continuously by 1 press of the Shutter button. Taking your First Photo English 18 Getting Started Setting the Scene Mode English The camera supports various preset modes for shooting in different environments and conditions. Each setting is configured automatically by the camera. To select scene modes: Press the Scene button to access Scene menu which displays the Scene menu options. [. . . ] Use the Up/Down navigation buttons to select This Image from the options and press the OK button to confirm. Use the Left/Right navigation buttons to select previous/next file. 2/140 IMAGE STORAGE THIS IMAGE INDEX PRINT DPOF IMAGE ALL IMAGES 2. Press the Up/Down navigation buttons to set the number of copies. Number of copies 3 3. Press the Up/Down navigation buttons again to select the paper size. [. . . ]