User manual SANYO VPC-SX560E

[. . . ] Keep this manual in a safe place for later reference. Warning TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE kFOR AMERICAN USERS The following advisory is included in accordance with the laws of the State of California (USA): WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, birth defects or other reproductive harm. i This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] <Caution> i Due to the characteristics of the camera, the outer surface may become warm during use, but this does not indicate a malfunction. i If the camera starts to feel uncomfortably hot during use, you might temporarily discontinue use until it cools down, or try holding it in your other hand for a while. Please use a tripod or other support when using the camera for a long time. 13 English DATE AND TIME SETTING When the camera is first turned on after purchase, the Clock Set Screen appears. Proceed from step 4 to set the date and time. 1 2 3 Press the ON/OFF button to turn on the camera. Press and hold the [?] button for at least 1 second. Use the [I] and [J] arrow keys to select "CLOCK SET", and press the SET button. h To select the desired setting: Press the [G] and [H] arrow keys. h To change the assigned value: Press the [I] and [J] arrow keys. SET button SETUP 4 ON/OFF button [?] button Arrow keys 5 6 Press the SET button. h Assign the desired value to each setting. CLOCK SET DATE TIME DISP 2010/07/01 00:00 D/M/Y OK Press the [?] button. h The date and time settings are completed, and you are returned to the Setup Menu. English 14 HINT i Under normal conditions, while the battery pack is being replaced, an internal battery will maintain the date and time settings. However, there is a small chance the settings may be lost (the backup will last for about 7 days). h To return to the recording screen without changing the settings, press the [?] button. PHOTO 4000x3000 2 Use the [G] and [H] arrow keys to select a setting, and press the SET button. h The photo settings are changed, and you are returned to the recording screen. To change the flash operation 1 While the Recording Screen is shown, press the [?] button. h The screen to select the flash operation appears. h To return to the Recording Screen without changing the setting, press the [?] button. FLASH AUTO 2 Use the [G] and [H] arrow keys to select the desired setting, and press the SET button. h The flash operation setting is modified, and you are returned to the Recording Screen. i The Setup Menu appears when the [?] button is kept pressed for at least 1 second. i Press the [?] button to cancel the Setup Menu, and then briefly press the [?] button again. 21 English HINT What is the camera focusing on?Target mark i A target mark & on the monitor shows the area the camera is focusing on. i The camera automatically determines the correct focus by measuring from 9 different focus points within the shooting area. If the target mark is at a position that is F3. 1 1/4 different from the point you wish to focus on, you can refocus, for Camera shake icon example, by changing the shooting Shutter speed angle. [. . . ] 105 g (3. 7 oz. ) (camera only [without battery pack and card]) Image stabilizer 43 English Camera connectors USB terminal mini HDMI terminal Dedicated regrouped jack USB 2. 0 High Speed Video output Total number of scan lines (effective number of scan lines): 750p (720p)/1125i (1080i)/525p (480p) Audio output: L-PCM 48 kHz sampling Battery life Shooting Still image shooting mode Video clip recording mode Playback Approx. 170 images: CIPA standard (when a SanDisk 2 GB SD Memory Card is used) Approx. 240 minutes: Monitor on, continuous playback i Until battery pack runs out when using a fully charged battery pack at a 25 °C (77 °F) ambient temperature. i The operation time may vary depending on the conditions of the battery pack and the conditions of use. [. . . ]