User manual SANYO VPC-T700

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] To pause video playback, press the SET button. To cancel pause, press the SET button again. Video clips cannot be displayed rotated or enlarged. Playing Back Still Images/Video Clips on a TV You can also play back your images on a TV screen. Before connecting to any video devices, make sure to select NTSC/PAL to match the broadcast standard of the video equipment you are going to connect to the camera. Connect one end of the AV cable to the PC/AV terminal of the camera. Connect the other end to the AV input socket of the TV set. The method of operation is the same as playing back still images and video clips on the camera. EN-37 Attaching Voice Memos A maximum of 30 seconds of audio can be recorded like a memo for captured still images. The voice memo can be recorded only once. Slide the mode switch to [ The last image appears on the screen. Select the image that you want to attach the voice memo with the / buttons. [VOICE RECORDING] is displayed on the screen and recording starts. To stop recording voice memo during recording, press the shutter button again. [VOICE RECORD END] will be displayed and the recording will end. A [ ] icon is displayed with images that have been recorded with a voice memo. Playing back voice memo A press of the SET button displays [VOICE PLAYBACK] and plays back the voice memo. Voice memo is only available for still images. Slideshow Display The slideshow function enables you to playback your still images automatically in order one image at a time. Select [Slide Show] with the / buttons, and press the SET button. Select the desired interval time with the / buttons, and press the SET button. To stop the slide show during playback, press the SET button. The image is displayed on screen when you press the SET button. The Auto Off function does not operate during slide show. All still images in the folder are automatically played back. [. . . ] Set the flash to something other than flash off mode. Set the flash to something other than flash off mode. Set the exposure compensation to a larger value. Set the exposure compensation to a smaller value. Images do not appear on LCD monitor is dark. [. . . ]