User manual SCHOLTES CI 96I.T I S

[. . . ] IT Descrizione dell’apparecchio GB Description of the appliance Control panel The control panel described in this manual is only a representative example: it may not exactly match the panelon your appliance. 1 INCREASE POWER button switches on the hotplate and controls the power (see Start-up and use). 2 REDUCE POWER button controls the power and switches off the hotplate (see Start-up and use). 3 COOKING ZONE indicator represents the corresponding cooking zone. [. . . ] Furthermore, the fan may continue to work even after switching the hob off, if the temperature detected is high. The types of noise listed above are due to induction technology and are not necessarily operational faults. Seconds: the cooking zone will immediately begin operating at its maximum power level (16). € Press and hold the button for approximately 2 seconds: the cooking zone will operate at power level 2 (slow cooking function). Medium function* Press the m edium button to switch on the cooking zone at medium power level 8. Booster function* The booster function for some of the cooking zones may be used to shorten heating-up times. it may be activated by pressing the b ooster o ost er oster button. The indicator light directly above the button will illuminate. This function boosts the power to 2000 W or 3000 W, depending on the size of the corresponding cooking zone. While the booster for one of the cooking zones is active, the corresponding front or rear cooking zone will operate at a reduced power level (e. If the booster for the rear left-hand hotplate has been activated, the power level of the front left-hand hotplate will be reduced). For further information, please refer to the Technical description of the models. Switching off the cooking zones To switch off a cooking zone: • Press the - button: the power of the cooking zone will progressively decrease until it is switched off. € Alternatively, the - + and buttons may be pressed Switching on the hob To switch the hob on, press and hold the approximately one second. Button for simultaneously: this immediately returns the power setting to 0 and the cooking zone switches off. If the and buttons are pressed for an extended period of time, the timer scrolls quickly through the minute values in the corresponding direction. All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. Select the cooking zone using the corresponding selector button. Adjust the power level of the cooking zone. The indicator light corresponding to the selected zone will start flashing. The timer begins counting down immediately. When the time has elapsed, a buzzer will sound (for one minute). [. . . ] If the oven is too hot, the pyrolytic cycle may not start. The programme may only be started once the oven door has been closed. To activate the PYROLITIC CYCLE cleaning procedure, press and hold the button for approximately 4 seconds. The TIMER KNOB may be used to select the desired cleaning level; there are three default time settings which cannot be modified. [. . . ]