User manual SCHOLTES MULTIPLO.1 F

[. . . ] Switching on the hob Switching on the cooking zones Switching off the cooking zones Single cooking zone operation The timer Programming the cooking time Control panel lock BOOST function Switching off the hob Safety devices Technical description of the models Practical advice on using the appliance Accessories supplied Optional extra kit Before operating your new appliance please read this instruction booklet carefully. Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance. Keep all packaging material out of the reach of children. [. . . ] To switch from the single cooking zone to separate cooking zones. It will then be possible to select one of the two separate cooking zones. All the cooking zones may be programmed for a length of time between 1 and 99 minutes. When the time has elapsed, a buzzer will sound (for 10 seconds). The cooking recipient may be maintained until the cooking process is complete. Alternatively, once the correct boiling/frying temperature has been reached and the hotplate switched off using the relevant buttons, the cooking recipient may be rotated by 90°, returning it to a horizontal position on the front cooking zone and keeping the temperature constant (see figure). The free cooking zone may be used to start another cooking process by pressing selector button and . When the hob is switched on, the oven controls may be locked in order to prevent the settings from being changed accidentally. To activate the function, press and hold button for 2 seconds; the controls will be locked and the indicator light above the button will switch on. To stop cooking), you must switch off this function. Press the button for a few moments, the indicator light will switch off and the lock function will be removed. If the appliance controls have been locked, they The extreme flexibility and versatility of the Multiplo means it is possible to cook any type of dish quickly, without compromising its quality. The "Boost" function in particular speeds up cooking times for dishes such as pasta or any fried food, reducing the overall time required by approximately 50% in comparison with the time required when using a cooking recipient with a single cooking zone (horizontal position). To bring the water to the boil or to fry food quickly, simply switch on the hob, placing the single cooking recipient centrally and in a vertical position with respect to the text "boost" (see figure). Will continue to be locked even after the hob has been switched back on. In order to switch the hob on again, you must remove the lock function. The hotplate only emits heat when a cooking recipient is placed on it. If, once the appliance has been switched on and the cooking zone and corresponding power level selected, the numerical indicator flashes, this means that the cooking recipient should be placed in the corresponding position. Heat indicators If, after the appliance has been used, the letter "H" remains lit on the corresponding display, this means that the heating zone is still hot (temperature over 60°C); do not touch it. This indication will disappear once the hotplate has cooled down. Buzzer This can also indicate several irregularities: · All of the above situations may cause the buzzer to sound. Select the single cooking zone then press buttons and to select the If the cause of the problem is not removed, the buzzer will keep sounding and the hob will switch off. [. . . ] If the surface of the hob is cracked, switch off the appliance to prevent electric shocks from occurring. do not place metal objects (knives , spoons , pan lids , etc. After using the hob, switch it off using the corresponding control device; do not rely solely on the pan sensor. When disposing of packaging material: observe local legislation so that the packaging may be reused. [. . . ]