User manual SCHOLTES TF 753 S (IX)

[. . . ] Keep all packaging material out of the reach of children. The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may cause harm to people and animals or may damage property. The supporting surface must be heat-resistant up to a temperature of approximately 100°C. [. . . ] If - and only if the power level is adjusted, another short beep will sound when the slider is released. The hotplate selection LEDs light up for the power adjustment period (10 seconds), during which the slider (or min/med/max buttons)* can influence the selected hotplate. Switching on the hob To switch the hob on, press and hold the approximately one second. The timer can be used to set a duration up to 99 minutes. Press the programming button until the timer . And buttons are pressed for an extended period of time, the timer scrolls quickly through the minute values in the corresponding direction. All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. Select the cooking zone using the corresponding selector button. Adjust the power level of the cooking zone. The indicator light corresponding to the selected zone will start flashing. confirm by pressing the indicator light is illuminated 2. Release the and press the button; +and buttons · The display will show the text DE and MO and the hob will be switched off. When the hob is switched on again it will be set to the "demo" mode. 30 To exit this mode, follow the procedure described above. The display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally. The EXTENSO TECHNOLOGY mode The EXTENSO TECHNOLOGY can be used to set the power of two "interconnected" hotplates to the same level. We especially recommend pans made from: cast iron, coated steel or special stainless steel adapted for induction. Use a magnet to test the compatibility of the cookware. SUITABLE UNSUITABLE Safety switch The appliance has a safety switch which automatically switches the cooking zones off after they have been in operation for a certain amount of time at a particular power level. When the safety switch has been triggered, the display shows "0". 0 For example: the rear right-hand hotplate is set to 5 and will switch off after 7 and a half hours of continuous operation, while the front left-hand hotplate is set to 2 and will switch off after 9 and a half hours. [. . . ] The crossed-out dustbin is marked on all products to remind the owner of their obligations regarding separated waste collection. For further information relating to the correct disposal of exhausted household appliances, owners may contact the public service provided or their local dealer. 34 Care and maintenance Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Stainless steel frame (only in models with outer frame) Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. [. . . ]