User manual SCHOLTES TIC 740 DD L IT

[. . . ] Switching on the hob Switching on the cooking zones Switching off the cooking zones Programming the cooking duration Timer Control panel lock Switching off the hob "Demo" mode Practical advice on using the appliance Safety devices Practical cooking advice Before operating your new appliance please read this instruction booklet carefully. Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance. Keep all packaging material out of the reach of children. [. . . ] Repeat the above procedure for each hotplate you wish to programme. Using multiple programmes and the display If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To visualise the time remaining for the other programmed hotplates, press the button repeatedly: the time remaining for each hotplate will be shown sequentially in clockwise order, starting from the front left hotplate. Use the button repeatedly until the duration you and buttons to set the new duration. The timer can be used to set a duration up to 99 minutes. When the time has elapsed, a buzzer will sound (for one minute). When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc. Press the button to lock the control panel: the indicator light above the button will switch on. To stop cooking), you must switch off this function. Press the button for a few moments, the indicator light will switch off and the lock function will be removed. If the control panel lock has been activated, the controls will continue to be locked even after the hob is switched on again. In order to switch the hob on again, you must first remove the lock function. It is possible to set the hob to a demonstration mode where all the controls work normally but the heating elements do not switch on. To activate the "demo" mode the hob must be switched on, with all the hotplates switched off. When the 6 seconds have elapsed, the ON/OFF and CONTROLS LOCKED indicator lights will flash for one second. To cancel a programme, follow the above instructions. At step 2, press the button: the duration decreases progressively until it reaches 0 and switches off. When the hob is switched on again it will be set to the "demo" mode. To exit this mode, follow the procedure described above. the display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally. [. . . ] â· If the surface of the hob is cracked, switch off the appliance to prevent electric shocks from occurring. â· The appliance is not intended to be operated by means of an external timer or separate remotecontrol system. When disposing of packaging material: observe local legislation so that the packaging may be reused. â· The European Directive 2002/96/EC relating to Waste Electrical and Electronic Equipment (WEEE) states that household appliances should not be disposed of using the normal solid urban waste cycle. [. . . ]