User manual SCHOLTES TIL 642

[. . . ] Switching the oven on for the first time Switching on the hob Switching on the cooking zones Booster function Switching off the cooking zones Programming the cooking zones Control panel lock Demo mode Switching off the hob Practical advice on using the appliance Safety devices Before operating your new appliance please read this instruction booklet carefully. it contains important information concerning the safe operation , installation and maintenance of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. [. . . ] The function may record a maximum of 10 changes in the power level. It is possible to lock the oven controls in order to avoid accidental changes to the settings (these may be made by children, during cleaning, etc. If the button is pressed for 3 seconds the controls are locked, the display shows CONTROL PANEL LOCKED and the CONTROLS LOCKED indicator light illuminates. To stop cooking), you must switch off this function. Press the button for 3 seconds and the lock function will be removed. When the controls are locked it is still possible to switch off the hob. The oven is able to operate in DEMO mode: all heating elements are deactivated, and controls remain operative. A buzzer sounds and the display shows the text DEMO ON. A buzzer sounds and the display shows the text DEMO O. If the control panel lock has been activated, the controls will continue to be locked even after the hob is switched on again. In order to switch the hob on again, you must first remove the lock function. Practical advice on using the appliance Use cookware made from materials that are compatible with the induction principle (ferromagnetic material). We especially recommend pans made from: cast iron, coated steel or special stainless steel adapted for induction. The indicator light is flashing, it may indicate: An incompatible pan A pan whose diameter is too small The pan has been removed from the hotplate. Residual heat indicators After the pan has been removed from one of the cooking zones, part of the power level indicator will flash while the temperature of that particular zone remains above 60°C. This reduces the risk of burns and scalds. Overheating protection If the electronic components overheat, the hob switches off automatically and the power level indicator will show the two external parts or the two internal and the two external parts as active. When the temperature has reached a more appropriate level, this message disappears and the hob may be used again. Safety switch The appliance has a safety switch that automatically switches off the cooking zones when they have been in operation for a certain amount of time at a given power level. When the safety switch has been triggered, the display shows 0. When the contents of the pan reach the optimal temperature, the hob buzzer will sound, a short beep will be emitted every 15 seconds and the display will show the text COOK OK. Ood may then be placed in the pan in the OIL and BUTTER cooking programmes; the sound and visual signals are interrupted and the automatic adjustment of the hob continues. [. . . ] Do not use any cleaning or degreasing products which are not suitable for use with aluminium. Do not use abrasive or corrosive detergents (for example, products in spray cans for cleaning barbecues and ovens), stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratch the surface beyond repair. Never use steam cleaners or pressure cleaners on the appliance. It is usually sufficient simply to wash the hob using a damp sponge and dry it with absorbent kitchen roll. [. . . ]