User manual SCHOLTES TIS 62 CL

[. . . ] Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance. Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance. [. . . ] The indicator light corresponding to the selected zone will start flashing. confirm by pressing the indicator light is illuminated 2. The timer begins counting down immediately. When the time has elapsed, a buzzer will sound (for one minute). Control panel lock When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc. Press the button to lock the control panel: the indicator light above the button will switch on. To stop cooking), you must switch off this function. Press the button for a few moments, the indicator light will switch off and the lock function will be removed. button or automatic selection occurs after 10 seconds. The timer begins counting down immediately. button or automatic selection occurs after 10 seconds. Repeat the above procedure for each hotplate you wish to programme. The 2 LEDs remain lit as long as the hotplates are linked (if EXTENSO TECHNOLOGY button is pressed again, the hotplates are disconnected and are both set to power level 0). Pressing the +, - or Max buttons for one of the two Flexi hotplates also affects the display corresponding to the other hotplate. To deactivate the EXTENSO TECHNOLOGY , press the button . A timer may be set for the EXTENSO TECHNOLOGY; this appears on the display and both LEDs corresponding to the linked hotplates light up. When the Timer button is pressed, the two linked hotplates are treated as if they were a single zone. Selecting and using EXTENSO TECHNOLOGY To begin using the EXTENSO TECHNOLOGY, press the button. EXTENSO TECHNOLOGY operation Once you have selected EXTENSO TECHNOLOGY by pressing the button , the 2 LEDs corresponding to the EXTENSO TECHNOLOGY for both hotplates light up; it will then be possible to control both as if they were a single zone. The power level will appear on both displays. Once activated, the EXTENSO TECHNOLOGY can also be programmed, using the same procedure as described for the individual hotplates. Accessories For optimal EXTENSO TECHNOLOGY performance, we recommend the use of pans with an elliptical or elongated base and a major diameter of at least 250 mm; if using pans with a smaller diameter, we recommend positioning them in the upper or lower part as indicated by the X symbol. [. . . ] After cleaning, it is advisable to rinse the surface well and dry it thoroughly. If water is spilt on the surface, dry it quickly and thoroughly. Some hobs have an aluminium frame which is similar to stainless steel. Do not use any cleaning or degreasing products which are not suitable for use with aluminium. [. . . ]