User manual SCHOLTES TIS 62 C L S

[. . . ] Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. € WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. € NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e. [. . . ] The fan functions at maximum power when the large induction element is at maximum power or when the booster function is on; in all other cases, it works at average power depending on the temperature detected. Furthermore, the fan may continue to work even after switching the hob off, if the temperature detected is high. The types of noise listed above are due to induction technology and are not necessarily operational faults. Switching on the cooking zones To operate a cooking zone, select the button corresponding to the desired zone and set the required power level by pressing down on the slider and moving it towards the right to increase the power level, or towards the left to decrease the power level. The min/med/max buttons can also be pressed directly to select the pre-set power levels: min (1) / med (8) / max (16), and to switch off the plate (see below). GB MIN/MED/MAX functions Press the MED button to switch on the cooking zone at medium power level 8. Press the MIN button to switch on the cooking zone at minimum power level 1. Press the MAX button to switch on the cooking zone at maximum power level 16. Booster function* The booster function for some of the cooking zones may be used to shorten heating-up times. The indicator light directly by pressing the above the button will illuminate. This function boosts the power to 2000 W or 3000 W, depending on the size of the corresponding cooking zone. € When the hob is switched on again it will be set to the “demo” mode. To exit this mode, follow the procedure described above. The display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally. • The pan has been removed from the hotplate. Overheating protection If the electronic elements overheat, the hob switches off automatically and appears on the display, followed by a flashing number. When the temperature has reached a suitable level, this message disappears and the hob may be used again. Safety switch GB F Practical advice on using the appliance !Use cookware made from materials which are compatible with the induction principle (ferromagnetic material). We especially recommend pans made from: cast iron, coated steel or special stainless steel adapted for induction. Use a magnet to test the compatibility of the cookware. [. . . ] 17 Care and maintenance GB Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Stainless steel frame (only in models with outer frame) Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. After cleaning, it is advisable to rinse the surface well and dry it thoroughly. If water is spilt on the surface, dry it quickly and thoroughly. [. . . ]