User manual SEAGATE SATAII-300 INTERNAL HARD DRIVE

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SEAGATE SATAII-300 INTERNAL HARD DRIVE. We hope that this SEAGATE SATAII-300 INTERNAL HARD DRIVE user guide will be useful to you.

Lastmanuals help download the user guide SEAGATE SATAII-300 INTERNAL HARD DRIVE.

Mode d'emploi SEAGATE SATAII-300 INTERNAL HARD DRIVE

Download

Manual abstract: user guide SEAGATE SATAII-300 INTERNAL HARD DRIVE

Detailed instructions for use are in the User's Guide.

 [. . . ] See your controller or system documentation for specific installation instructions. Prepare the drive for use with your Operating System. Always backup critical data before making changes. Windows®XP or 2000 prepares the drive during installation.  [. . . ] If you have not previously installed a SATA drive in your system,  you must install a Windows driver for your SATA PCI card or SATA-enabled motherboard or system so that Windows can recognize your new drive. For maximum compatibility,  Maxtor recommends downloading and installing the latest SATA driver from the website of the SATA card/motherboard/system manufacturer. The latest SATA drivers for Maxtor-branded SATA cards can be downloaded from the Worldwide Support section at www. maxtor. com. Choose from one of the following installation scenarios: A. Existing Windows 2000 or XP system ­ new drive as "storage only" C. Existing Windows 2000 or XP system ­ new drive as "boot drive" D. New Windows 98 or Me system or replacing a failed 98 or Me boot drive E. New Windows 2000 or XP system or replacing a failed 2000 or XP boot drive Special notes for installation scenarios C and D:
The DOS version of MaxBlast does not currently support USB mouse or keyboard input unless supported by your system BIOS. If you have a USB keyboard and/or mouse,  you may need to connect a PS/2 mouse or keyboard to your system temporarily to navigate through the program. MaxBlast for DOS can be operated from the keyboard using the Tab,  Enter/Return,  and arrow keys. To boot from the MaxBlast CD,  you may need to change the boot sequence or boot order settings in your system BIOS to "Floppy CDROM IDE-0" or "A,  CDROM,  C. " Depending on your BIOS type (AMI,  Award,  Phoenix),  the boot sequence settings may be located on the main setup screen or under the BIOS FEATURES SETUP or ADVANCED CMOS SETUP menus. 

PAGE 10

If your system cannot boot from a CD,  you can create a bootable MaxBlast diskette by inserting the MaxBlast CD into a system running Windows and choosing Create MaxBlast Installation Diskette from the menu. If you have dual optical (CD/DVD) drives,  try booting from the other optical drive. 

A. The Add New Hardware Wizard will appear informing you that it has found a new PCI mass storage controller. Follow the SATA card/motherboard/system manufacturer's instructions for installing the driver for the SATA controller. From the Windows desktop,  insert the MaxBlast CD and install MaxBlast for Windows. Follow the on-screen prompts to step through the installation process. Choose whether to install the drive as additional storage or as the new boot drive. Depending on your selection,  do one of the following: a. Additional storage install: After the drive has been set up as additional storage,  double-click the My Computer icon. A new drive letter and icon should appear. Boot drive install: When MaxBlast has finished copying data to your new drive,  eject any CDs or floppies and perform a normal shutdown. Continue to "Set the Boot Sequence (New boot drive only)" on page 15.  [. . . ] Actual quantities will vary based on various factors,  including file size,  file format,  features and application software. Specifications subject to change without notice. © 2006 Seagate,  Seagate Technology. MaxBlast,  Maxtor,  and the Maxtor Stylized logo are registered trademarks of Seagate Technology LLC.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SEAGATE SATAII-300 INTERNAL HARD DRIVE

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SEAGATE SATAII-300 INTERNAL HARD DRIVE will begin.