User manual SEAGATE USB 2.0 PCI ADAPTER CARD INSTALLATION

[. . . ] USB 2. 0 PCI Adapter Card Installation Guide 1 Pre Installation 3 Driver Installation 4 Product Registration Thank you for selecting the Maxtor USB 2. 0 PCI Adapter Card. 1. Once you have installed your new Maxtor USB 2. 0 PCI Adapter Card, turn on your computer. The Add New Hardware Wizard window will appear, informing you that your system has detected "USB Host Controller. " Take advantage of the benefits! By registering your new Maxtor USB 2. 0 PCI Adapter Card, you'll have the option to receive product updates, special offers, and important information about other data storage solutions from Maxtor. [. . . ] Maxtor does not warrant any product that is not manufactured by, for or with permission from Maxtor. This warranty is not applicable to: Abnormal wear and tear; Abuse, unreasonable use, mistreatment, or neglect; Damage caused during installation of the Product; Damage caused by the equipment or system with which the product is used; Damage caused by modification or repair not made or authorized by Maxtor; Product whose Maxtor Serial Number has been removed or defaced; Damage caused by liquids in the product case; Damage to the products' power connectors; Damage caused by use of nonMaxtor packaging; Damage caused by improper or improperly used packaging; Products that are determined to be stolen. THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. MAXTOR SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND AGAINST INFRINGEMENT. NO MAXTOR DEALER, AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION OR ADDITION TO THIS WARRANTY. MAXTOR IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF DATA, LOSS OF PROFITS, DOWNTIME, GOODWILL, DAMAGE OR REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING, PROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH MAXTOR DISK DRIVES OR MAXTOR PRODUCTS CONTAINING MAXTOR DISK DRIVES OR ANY SOFTWARE PRODUCT DISTRIBUTED THEREWITH. Some states/jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from jurisdiction to jurisdiction. Changes are periodically made to the information herein ­ which will be incorporated in revised editions of the publication. Maxtor may make changes or improvements in the product(s) described in this publication at any time and without notice. 2 Hardware Installation 2. The Wizard will prompt you for the location of your device drivers. Insert the Maxtor USB 2. 0 Software diskette into your floppy drive, then select the "Floppy disk drive" box and click "Next. " Adapter Card Installation 1. Turn off the power and remove the cover of your computer system. Locate an available 32-bit PCI slot on the system motherboard. [. . . ] Maxtor® is a registered trademark of Maxtor Corporation. Other brands or products are trademarks or registered trademarks of their respective holders. Maxtor P/N: 20170300, rev. Using the screw from the slot cover, fasten the USB 2. 0 PCI Adapter Card's mounting bracket to the system case. www. maxtor. com [. . . ]