Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SEGA CLUB KART. We hope that this SEGA CLUB KART user guide will be useful to you.
Lastmanuals help download the user guide SEGA CLUB KART.
You may also download the following manuals related to this product:
SEGA CLUB KART SCHEMATICS (300 ko) SEGA CLUB KART DELUXE TYPE (5633 ko) SEGA CLUB KART STANDARD TYPE (2352 ko)
Manual abstract: user guide SEGA CLUB KARTADDENDUM
Detailed instructions for use are in the User's Guide.
[. . . ] CARD READER REPLACEMENT INSTALLATION INSTRUCTION FOR STANDARD GAME ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESIGNED RELATED PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PLACEMENT OF DECALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Remove the Card Reader Replacement Unit from its shipping carton. Unwind the Blue Wires (Twisted Approximately 86" long). Attach the end of the Blue Wires with tape to the Green Ground Wire exposed in Step 3 (Near White Connectors. This leaves enought length in the Green Wire to pull it back into place after it is used to guide the Blue Wires into place).
Note: The Earth Ground Wire is only being used as a convenient means to guide the new Blue Wires into place. Care must be taken not to damage the wire, or separate the connector. It will need to be used as a ground for the Button Panel to ground it.
TAPE BLUE WIRES HERE
PHOTO 7 a
3.
From the back of the game, just below the NAOMI 2 Game BD, there is a 4" circular opening for the game harnesses. At this opening, very carefully pull the Green Ground Wire until the Blue Wires you taped become exposed. Remove the tape to separate both Blue Wire from the Green Ground Wire. Gently pull on the Blue Wires to expose enough wire to go to the I/O BD ( The I/O BD is located at the upper left of the electronics area of the back of the game). Pull the Green Wire carefully back into position for attachment to the Button Plate.
4.
5.
PHOTO 7 b CIRCULAR OPENING WIRES PULLED THROUGH OPENING
PHOTO 7 c
club kart standard
STEP 5
1. On the I/O BD, locate CN7 Pin 9 (Blue Wire). Using a pair of Wire Cutters, cut the Blue Wire from CN7 approximately 3" from the Connector. Strip off approximately 1/8" of the insulation off. Using a Bell Connector (provided) connect the Blue/White wire to the end of the Blue Wire that comes from the Wiper of the Accellerator Potentiometer. [. . . ] A 11/15/01
4.
club kart deluxe
STEP 3
1. On the I/O BD, locate the CN7 Pin 9 (Blue Wire). Using a pair of wire cutters, cut the Blue Wire from CN7 approximately 3" from the Connector. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SEGA CLUB KART
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SEGA CLUB KART will begin.
SEGA CLUB KART SCHEMATICS (300 ko)
