User manual SEGA DIRT DEVILS

[. . . ] SPECIFICATIONS Installation space: Height: Weight: Power maximum current: 64 in. (L) x 39 in. (W) 77 in. 8 Amp AC 120V 60 Hz MONITOR: 29" NANAO MONITOR (OR) 27" WELLS GARNER MONITOR INTRODUCTION OF THE OWNERS MANUAL SEGA ENTERPRISES, LTD. , has for more than 30 years been supplying various innovative and popular amusement products to the world market. This Owners Manual is intended to provide detailed descriptions together with all the necessary installation, game settings and parts ordering information related to DIRT DEVILS, a new SEGA product. This manual is intended for those who have knowledge of electricity and technical expertise, especially in ICs, CRTs, microprocessors, and circuit boards. [. . . ] When setting difficulty levels, the frequency can be refered to as a standard. When in the PAGE 2/2 mode, press the TEST BUTTON to return to the MENU mode. PRESS TEST BUTTON TO EXIT FIG. 7. 11b BOOKKEEPING (2/2) 7 - 12 BACKUP DATA CLEAR BACKUP DATA CLEAR Clears the contents of BOOKKEEPING and high score player ranking entry. When clearing, bring the arrow to "YES" and when not clearing, to "NO", by using the SERVICE BUTTON, and push the TEST BUTTON. When the data has been cleared, "COMPLETED" will be displayed. Bring the arrow to "NO" and press the TEST BUTTON to cause the MENU mode to return on to the screen. Note that the contents of the GAME SETTING, COIN SETTING, and BOARD SETTING are not affected by BACKUP DATA CLEAR operation. YES (CLEAR) >NO (CANCEL) SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT FIG. HANDLE MECHA In order to prevent an electric shock and short circuit, be sure to turn power off before performing work by touching the interior parts of the product. Damaged wiring can cause an electric shock or short circuit accident. In the test mode, if the steering wheel's VR variations are not within the allowable range, the VR installation position adjustments or VR replacement is needed. Also, be sure to apply grease to the VR gear portion once every 3 months. 8 - 1 REMOVING THE CONTROL PANEL 1 2 3 4 5 Turn the power switch off. Remove a total of 4 tamperproof screws from both sides of the control panel's front. Remove the two tamperproof screws from the underside of the control panel. Wiring connectors are connected inside the control panel. Carefully draw the control panel in a manner so as not to damage wiring. Disconnect the wiring connector. 31 8 - 2 REPLACING AND ADJUSTING THE HANDLE'S VR Never touch places other than those specified. Touching places not specified can cause electric shock and/or short circuit. After the replacement or adjustment of the VR, be sure to set the variable value of the VR in the test mode's Volume Setting. REPLACING THE VOLUME 1 2 4 Turn off the power. Take out the 2 screws to remove the Volume Gear and replace the Volume. 3 Take out the 2 screws which secure the volume Bracket and remove the Volume Bracket. 5 After replacing the Volume, perform Volume setting in the Volume Setting Mode. ADJUSTING THE VOLUME 1 2 In the Test Mode, have the Volume value indicating screen displayed. Loosen the 2 screws which secure the Volume Bracket to disengage Gear Mesh. 4 5 Fasten screws which secure the Volume Bracket. [. . . ] INY-1701 130-5152 DESCRIPTION SPEAKER BRKT SPKR BOX MINI DOME 12W 67 63 ASSY VIRTUAL BUTTON TWIN (DRT-1290) ITEM NO. DRT-1291 171-6478B 212-5205-12 509-5560-Y 509-5561-R DESCRIPTION VR BUTTON BRKT PC BD LIGHTING SWX5 CONN JST M 12P RTA PB SW W/L 6V 1L Y PB SW W/L 6V 5L R 64 ASSY BASE BOX (DRT-1500) ITEM NO. DRT1-1501 DYN-2003 DYN-2004 DYN-2005X DYN-2006 DRT-1510 DYN-2007X DYN-2009X 220-5575 DESCRIPTION MAIN BASE BASE LID F LOCK TNG FLOOR MAT HINGE 480 ASSY BASE LID R LID EDGE L LID EDGE R CAM LOCK MASTER W/O KEY 65 71 MAIN BASE (DRT1-1501) ITEM NO. DYN-2002X-A DRT-1501-A DRT-1501-B 999-0167 999-0169 DESCRIPTION MAIN BASE BLANK STICKER BASE L STICKER BASE R LEG ADJUSTER BOLT 1/2X13X3 CASTER 2 1/2" 66 72 ASSY SEAT TWIN 1P (DRT-1600) 73 67 ASSY SEAT TWIN 1P (DRT-1600) ITEM NO. [. . . ]