User manual SEGA F-ZERO AX DELUXE TYPE

[. . . ] 1ST PRINTING Sept `03 www. sauservice. com Owner's Manual DELUXE TYPE SEGA AMUSEMENTS USA, INC. 4201-6769 GAME CODE: FZR VISIT OUR WEBSITE! BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. [. . . ] LINK NUM Set the number of game machines to link. Set this to "1" for the single setting. "2" or more allows linked play. You will need to set up groups and configure the NUMBER to enable linked play. GROUP Used to set groups among the linked machines. For instance, if four machines are connected and you want two groups of two, set two to "A" and the other two to "B. " Ensure that you always have a group "A". NUMBER Assigns a number for each machine within a group. Do not use the same number twice in one group. Also note that you must set one machine as "1. " Changing the GAME DIFFICULTY, HANDICAP, VS BATTLE MODE, PASSWORD DISP, and RACE MODE LAPS settings of the "1" machine will automatically change the settings of machines numbered "2" to "4. " After changing the settings, select EXIT and press the TEST Button to return to the Game Test Menu screen. www. seuservice. com 94 10-3F CARD TEST Test the functionality of or clean the card read/writer. The card read/writer should be tested and cleaned periodically. STOP IMPORTANT! Clean the card reader/writer periodically. Set the TRIFORCE's internal clock to the correct time (see section 10-2I). If the internal clock is not set to the correct time, card play may be turned off at a different time from the one intended. CARDTEST ->MAGNETICCARDR/WCHECK MAGNETICCARDCLEANING MEMORYCARDR/WCHECK CARDCLOSESETTING EXIT SELECTWITHSERVICEBUTTON ANDPRESSTESTBUTTON FIG. 3 f a CARD TEST Screen MAGNETIC CARD R/W CHECK Checks the card reader/writer. When checking, the message "Checking the card reader/writer" is shown and a read test, write test, and print test are automatically performed. If the test is completed without an error, the machine dispenses the card from the card reader/writer slot and posts a message asking you to remove the card. When the card has been taken, the screen reads "Succeeded to read/write. " If an error occurs, the screen produces an error display (see 18-1). If the error persists, try cleaning the read/write heads. MAGNETIC CARD CLEANING This allows you to clean the card reader/writer head. For instructions on handling the cleaning card, see "7-2 Head Cleaning". 1- Select MAGNETIC CARD CLEANING and press the TEST Button. The message "Insert the CLEANING CARD. " will appear on the screen. 2- Insert the cleaning card into the card slot. [. . . ] 1 2 3 4 101 102 103 104 201 202 203 301 PART NO. FZR-3801 FZR-3802 FZR-3803 FZR-3804 370-5071-02 280-5009-01 280-5275-SR10 601-6231-D050 000-T00408-0B 000-P00316-WB 050-H00300 FZR-60056 DESCRIPTION FLOOR FRONT SENSOR BRKT A SENSOR BRKT B WATER PROOF SPONGE BEAM SENSOR(R-9382D-12) CORD CLAMP 21 CORD CLAMP SR10 EDGING NEW TYPE M SCR TH BLK M4×8 M SCR PH W/FS BLK M3×16 HEX NUT M3 WH SENSOR RX NOTE www. seuservice. com 232 35 ASSY FLOOR R (FZR-3820) D-1/2 233 www. seuservice. com 35 ASSY FLOOR R (FZR-3820) ITEM NO. 1 2 3 4 5 6 7 201 202 203 204 205 206 PART NO. FZR-3821 FZR-3822 FZR-3823 FZR-3824 FZR-3825 FZR-3826 FZR-3827 031-000516-0C 050-F00500 068-552016 000-P00416-W 030-000620-S 060-F00600 DESCRIPTION FLOOR RIGHT FLOOR SASH A FLOOR SASH B FLOOR SASH C FLOOR MAT FLOOR HOOK PLATE LOCKING HOOK CRG BLT CRM M5×16 FLG NUT M5 FLT WSHR 5. 5-20 ×1. 6 M SCR PH W/FS M4×16 HEX BLT W/S M6×20 FLT WSHR M6 NOTE D-2/2 www. seuservice. com 234 36 ASSY FLOOR L (FZR-3840) D-1/2 235 www. seuservice. com 36 ASSY FLOOR L (FZR-3840) ITEM NO. [. . . ]