User manual SEGA GHOST SQUAD DELUXE TYPE

[. . . ] 1ST PRINTING NOVEMBER `04 www. sauservice. com ® Owner's Manual Deluxe Version SEGA AMUSEMENTS USA, INC. 4201-6831-01 GAME CODE: CTF BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. [. . . ] RIGHT/LEFT SPEAKER(ON, OFF) When set to "ON", the test sends a beep to each audio output interface. Only the word "SPEAKER" is displayed when the OUTPUT TYPE is set to "MONO", and when set to "ON", the test sends the same beep to both the left/right audio output interfaces. To test surround output, it is necessary to use a separate Audio Amp, and receive signal from a terminal not in use at the time of shipping. Note: Not available with this product. (B) Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen. www. sauservice. com 70 F. TEST to adjust monitor colours and verify screen size. COLOUR CHECK Screen Monitor COLOUR CHECK screen is displayed initially. Each of the colours (red, green and blue) is darkest at the far left and gets progressively lighter (32 steps) towards the right. Monitor brightness is set correctly if the white colour bar is black at the left edge and white at the right edge. C. R. T. TEST 1/2 1 32 RED GREEN BLUE WHITE PRESS TEST BUTTON TO CONTINUE Press the TEST Button to proceed to the next page. TEST 2/2 PRESS TEST BUTTON TO EXIT Adjust the CHECK GRID so that the entire GRID is displayed on the screen. Press the TEST Button to return to the SYSTEM MENU screen. 71 www. sauservice. com G. COIN ASSIGNMENTS Use COIN ASSIGNMENTS to set the credit rate for each coin inserted. Use the SERVICE Button to move the cursor to the desired test item. Press the TEST Button to change the setting or to open the detailed settings. Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen. COIN ASSIGNMENTS COIN CHUTE TYPE SERVICE TYPE COMMON COMMON TO CREDIT RATE 1 CREDIT(S) TO CREDIT RATE 1 CREDIT(S) (A) (B) (C) (C) (D) (H) COIN ASSIGNMENTS COIN CHUTE TYPE SERVICE TYPE INDIVIDUAL INDIVIDUAL COIN CHUTE #1 COIN 1 COIN(S) COUNT AS COIN CHUTE #2 COIN 1 COIN(S) COUNT AS DETAIL SETTING GAME COST SETTING EXIT COIN CHUTE #1 COIN TO CREDIT RATE 1 COIN(S) COUNT AS 1 CREDIT(S) DETAIL SETTING GAME COST SETTING EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON COIN CHUTE TYPE. . . COMMON COIN CHUTE TYPE. . . INDIVIDUAL (A) COIN CHUTE TYPE(COMMON, INDIVIDUAL) Adjust settings according to the specs of the cabinet COIN CHUTE. COMMON This is for cabinets where a single COIN CHUTE is used by multiple players. Coins inserted by each player are treated as common credits. Up to 2 COIN CHUTES (#1 and #2) may be used. The (C) COIN TO CREDIT RATE setting for COIN CHUTE #1 and #2 may be set differently. INDIVIDUAL This is for cabinets with individual COIN CHUTES for each player. Coins inserted by each player are treated as individual player credits. The (C) COIN TO CREDIT RATE setting is used by all COIN CHUTES. (B) SERVICE TYPE(COMMON, INDIVIDUAL) Use this to set the function of each SERVICE Button when there is more than one SERVICE Button. [. . . ] CTF-2001 CTF-2002X CTF-2003 CTF-2004X CTF-2005 CTF-2006-01 509-6069 280-5009-01 050-F00400 068-441616 000-T00408-0B 000-F00408 CTF-60031 DESCRIPTION CONTROL PANEL BASE CARD ENTRY PLATE ENTRY PLATE SASH LOCK BRKT CUSHION SPONGE CONT PNL STICKER CONTROL PANEL ENG SW PB OBSA-45UM-G-1FLED-G-5V CORD CLAMP 21 FLG NUT M4 FLT WSHR 4. 4-16X1. 6 M SCR TH BLK M4X8 M SCR FH M4X8 WH START SW NOTE www. sauservice. com 174 CONTROL UNIT (CTF-2100) (D-1/2) 175 www. sauservice. com CONTROL UNIT (CTF-2100) ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 101 102 103 104 105 106 201 202 203 204 205 206 301 302 PART NO. JPT-2030 CTF-2101 CTF-2102 CTF-2103 CTF-2104 CTF-2105 CTF-2106 CTF-2107 CTF-2108 CTF-2109 CTF-2110 CTF-2111 CTF-2112 CTF-2113 CTF-2114 CTF-2115 CTF-2116 CTF-2117 CTF-2118 CTF-2119 CTF-2120 CTF-2121 CTF-2122 CTF-2123 CTF-2124 CTF-2125 CTF-2126 CTF-2127 CTF-2128 CTF-2129 124-5097 509-5080 280-5124-04 280-5124-05 601-0460 310-5029-D20 FAS-000100 000-P00306-S FAS-120029 FAS-120030 065-E00400 FAS-600020 CTF-60032 CTF-60033 DESCRIPTION SENSOR UNIT COVER L COVER R FRONT SIGHT MAIN TRIGGER SUB TRIGGER SELECTOR SELECTOR HOLDER SELECTOR JOINT PAD BASE BEARING HOLDER PAD SOLENOID FRAME SHAFT JOINT PAD FRAME RECOIL DAMPER SOLENOID DAMPER SHAFT DAMPER F SHAFT DAMPER R CAP BASE LIGHT CAP PAD BEZEL PAD PIN TRIGGER SPRING SELECTOR SPRING SHAFT JOINT PIN SHAFT STOPPER DAMPER BASE RETURN SPRING SOLENOID SW MICRO TYPE (SS-5GL2) NYLON CLAMP NK04 NYLON CLAMP NK05 PLASTIC TIE BELT 100 M/M SUMITUBE F D 20MM M SCR PH W/SMALL FS BLK M3X12 M SCR PH W/S M3X6 TAP SCR P-TITE PH 4X8 TAP SCR P-TITE PH BLK 4X12 E RING 4MM FLT WSHR NORM A M8 WH CONTROLLER MAIN EXT WH CONTROLLER SW EXT NOTE (D-2/2) www. sauservice. com 176 SENSOR UNIT (JPT-2030) ITEM NO. JPT-2031 838-13144 012-P00306 DESCRIPTION SENSOR HOLDER SENSOR BD GUN SENSE TAP SCR #2 PH 3X6 NOTE 177 www. sauservice. com ASSY MAIN BD (CTF-4200) ITEM NO. [. . . ]