User manual SEGA HUMMER STD

[. . . ] OWNER'S MANUAL IMPORTANT Before using this product, read this manual carefully to understand the contents herein stated. After reading this manual, be sure to keep it near the product or in a convenient place for easy reference when necessary. -2- -3- TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1. HANDLING PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRECAUTIONS REGARDING INSTALLATION LOCATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2-1 LIMITATIONS OF USAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2-2 OPERATION AREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. PRECAUTIONS REGARDING PRODUCT OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3-1 BEFORE OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3-2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4. [. . . ] Set the LINK ID numbers so that all communicating cabinets have different numbers. When positioning cabinets, ensure that you arrange them so that the LINK ID numbers increase from left to right. Set the 1st place continue setting for VS mode (Default: OFF). When this setting is set to "ON, " the player that comes in 1st place in VS mode will be able to continue free of charge. NOTES: - When this setting is set to "ON, " there will be a difference between the number of credits entered and the number of plays in BOOKKEEPING. - Can only be set on cabinet with LINK ID "1", and other communicating cabinets also set accordingly. Set the language for in-game messages (Default: ENGLISH). If set to "CHINESE, " the in-game messages will be displayed in simplified Chinese characters. NOTE: Only displayed on cabinets for which the region is set to EXPORT. ADVERTISE SOUND SPEEDOMETER TOTAL MACHINE LINK ID VS MODE 1ST CONTINUE SYSTEM LANGUAGE Use the SERVICE Button to move the cursor to the desired test item. Press the TEST Button to select the test item. 3. 4. When all setting adjustments are completed, select EXIT and press the TEST Button. The GAME TEST MODE screen reappears. - 47 - 9-3-5 STEERING FORCE FEEDBACK This screen is for setting the strength of the steering wheel's force feedback and checking the operation of the steering wheel motor. Periodically use this screen to check that the steering wheel motor is operating normally. Changes to the settings do not become effective until EXIT has been selected on the GAME TEST MODE screen. After a setting has been changed, be sure to always exit the GAME TEST MODE. Also, always perform the steering wheel motor initialization operation before checking the steering wheel motor. On the GAME TEST MODE screen, select STEERING FORCE FEEDBACK and press the TEST Button. The STEERING FORCE FEEDBACK screen appears. 01 STEERING FORCE FEEDBACK 1. FORCE INITIALIZE LEFT CENTER RIGHT NORMAL COMPLETED OFF OFF OFF EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON 2. Each item is explained below. FORCE INITIALIZE The force on the steering wheel can be set at 2 different levels; SOFT or NORMAL. (Default setting: NORMAL) Performs initialization operation for steering wheel motor. When selected, "INITIALIZING" is displayed and the steering wheel moves automatically. [. . . ] For this game, up to 4 machines can be connected to allow up to 4 players to play simultaneously. 1. Turn on the power on each machine to be used in network play. Cause all of the machines to enter the Test Mode. Select the GAME TEST MODE and press the Test button to display the GAME TEST MENU screen. [. . . ]