User manual SEGA INITIAL D TWIN TYPE

[. . . ] www. seuservice. com 2ND PRINTING OCT `02 TWIN TYPE Owner's Manual SEGA ENTERPRISES, INC. 999-1488 VISIT OUR WEBSITE! BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. [. . . ] This test should be used periodically to check that each input device is functioning correctly. GAME TEST MODE INPUT TEST STEERING ACCEL BRAKE GEAR POSITION START CHANGE VIEW SERVICE TEST XXH XXH XXH N OFF OFF OFF OFF PRESS TEST AND SERVICE BUTTON TO EXIT FIG. 3 b INPUT TEST Screen Test the STEERING, ACCEL and BRAKE controls to ensure that they are functioning properly and that the parameters change smoothly as each input device is operated. Display N, UP and DOWN using the GEAR POSITION. N should display there is no control input. Verify that both UP and DOWN display in sync with the position of the shift knob. Press the START, CHANGE VIEW, SERVICE and TEST Buttons. If functioning correctly, each indicator will switch from OFF to ON. Press the SERVICE and TEST Buttons simultaneously to return to the Game Test Menu screen. 47 www. seuservice. com C. OUTPUT TEST Select OUTPUT TEST to display the following screen and check the status of each lamp. This test should be used periodically to check that the lamps are functioning correctly. GAME TEST MODE OUTPUT TEST ->START BUTTON CHANGE VIEW BUTTON PRESS TEST BUTTON TO EXIT FIG. 3 c OUTPUT TEST Screen The cursor toggles automatically between START Button and CHANGE VIEW Button, and each lamp lights up. Move the cursor to EXIT and press the TEST Button to return to the Game Test Menu screen. www. seuservice. com 48 D. FORCE FEEDBACK CAUTION! If you select FORCE FEEDBACK, the STEERING will rotate automatically when you press the TEST Button. The STEERING will also rotate automatically during FORCE TEST. Make sure that no one is touching the STEERING before running these tests as contact may cause injury. When you select "FORCE FEEDBACK", a connection test runs and the STEERING rotates. When the connection check completes, a screen similar to the one below is displayed, and you may adjust the STEERING resistance. GAME TEST MODE FORCE FEEDBACK (MIN 0 : MAX 10 : DEFAULT 4) FORCE = UP DOWN FORCE TEST (FORCE = 4) CENTER OFF RIGHT OFF LEFT OFF -> EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON XX FIG. 3 d FORCE FEEDBACK Screen FORCE: Set the STEERING resistance The smaller the value, the weaker the resistance; the larger the value, the stronger the resistance. (Minimum value is 0; the maximum value is 10. The default setting is 4. ) Move the cursor to UP or DOWN and press the TEST Button to change the value. FORCE TEST: Verifies the STEERING motor is working properly Conducted when the STEERING resistance is set at 4. Toggle between OFF and ON by aligning to CENTER and pressing the TEST Button. The STEERING will rotate and stop in the center position. Pressing the SERVICE Button moves the cursor to the next menu item and CENTER changes to OFF. Control of the STEERING is then released. [. . . ] SPG-2201 SPG-2202 SPG-2203 SPG-2204 SPG-2205 SPG-2206 SPG-2207 SPG-2208 SPG-2209 SPG-2210 SPG-2211 SPG-2212 SPG-2213 SPG-2214 SPG-2215 SPG-2216 SPG-2217 SPG-2219 SPG-2220 SPG-2221 100-5263 220-5484 601-7944 310-5029-F15 280-0419 028-A00304-P 020-000520-0Z 000-P00420 000-P00508-W 000-T00408-0C FAS-450005 000-P00405 FAS-000001 050-H00500 060-F00400 DESCRIPTION BASE ACCEL PEDAL BRAKE PEDAL ACCEL SPRING BRAKE SPRING SHAFT ACCEL GEAR BRAKE GEAR NEUTRAL STOPPER VR PLATE ACCEL VR PLATE BRAKE AMPL GEAR GEAR SHAFT STOPPER RUBBER CUSHION COVER VR COVER GEAR STAY WSHR NEUTRAL STOPPER D BEARING 12(OILES 80F-1212) VOL CONT B-5K OHM GEAR 15 SUMITUBE F F15MM HARNESS LUG SET SCR HEX SKT CUP P M3×4 HEX SKT H CAP SCR BLK M5×20 M SCR PH M4×20 M SCR PH W/FS M5×8 M SCR TH CRM M4×8 SPR PIN BLK OZ 6×10 M SCR PH M4×5 M SCR TH CRM M3×6 HEX NUT M5 FLT WSHR M4 NOTE www. seuservice. com 104 ASSY BASE BOX (TOF-1520) 9 10 * Note: Bax box may appear different then illustration Note: After installing 5 and 6 , attach to 1 . ITEM NO. 1 2 4 5 6 7 8 9 10 201 202 203 204 205 PART NO. TOF-1521 DYN-2003 SDW-1102X DYN-2006 FRI-1510X DYN-2007X DYN-2009X 999-0167 999-0169 000-T00512-0B 031-000514-0B 050-F00500 031-000414-0C 050-F00400 DESCRIPTION MAIN BASE BASE LID F FLOOR MAT HINGE 480 ASSY BASE LID R LID EDGE L LID EDGE R LEG LEVELER CASTER M SCR TH BLK M5×12 CRG BLT BLK M5×14 FLG NUT M5 CRG BLT CRM M4×14 FLG NUT M4 NOTE 105 www. seuservice. com MAIN BASE 2 3 ITEM NO. FRI-1501-A 999-0167 999-0169 DESCRIPTION MAIN BASE BLANK LEG LEVELER CASTER NOTE www. seuservice. com 106 ASSY SEAT 6 107 www. seuservice. com ASSY SEAT ITEM NO. [. . . ]