User manual SEGA JAMBO SAFARI

[. . . ] No other product in this machine is hereby covered. Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor. Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void. [. . . ] Executing "BACKUP DATA CLEAR" in the SYSTEM TEST MODE does not clear the BOOKKEEPING data in the GAME TEST MODE. Entering the TEST mode clears fractional number of coins less than one credit and BONUS ADDER data. The SYSTEM TEST mode mainly allows for IC Board functioning check, monitor adjustment, coin assignments, etc. For details, refer to NAOMI SERVICE MANUAL. The following assignments, however, should be designated for this product. CABINET TYPE: MONITOR TYPE: COIN CHUTE TYPE: 1 PLAYER (S) HORIZONTAL COMMON 7 - 3 GAME TEST MODE SYSTEM MENU JAMBO SAFARI TEST MENU RAM TEST JVS TEST SOUND TEST C. R. T. TEST SYSTEM ASSIGNMENTS COIN ASSIGNMENTS BOOKKEEPING BACK UP DATA CLEAR CLOCK SETTING INPUT TEST OUTPUT TEST SOUND TEST GAME ASSIGNMENTS VOLUME SETTING BOOKKEEPING BACK UP DATA CLEAR >EXIT ROM BOARD TEST >GAME TEST MODE EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON TO EXIT SELECT WITH SERVICE BUTON AND PRESS TEST BUTTON Press the TEST button to display the SYSTEM TEST MODE MENU. By pressing the SERVICE button, move the arrow (->) to select the GAME TEST MODE. Press the TEST button to enter GAME TEST MODE. The screen displays the GAME TEST MODE MENU. By pressing the SERVICE button, move the arrow (->) to select the desired item. Press the TEST button to execute the selected item. The screen (2/2) allows screen size and distortion to be tested. Press the TEST BUTTON to shift to the next screen (2/2). The screen (1/2) enables color adjustment check to be performed. The color bar of each of the 4 colors, i. e. , red, green, blue, and white, is the darkest at the extreme left and becomes brighter towards the extreme right. Periodically check the MONITOR adjustment status on this screen. TEST to cause the MONITOR to display the screen shown left, allowing MONITOR adjustment status to be checked. 7 - 8 VOLUME SETTING When VOLUME SETTING is selected, the following appears on the screen and each operating unit's Volume can be set. If the operability is unsatisfactory, or when the Volume is adjusted or replaced, set the Volume in this mode. The 3 kinds of Volume Settings for HANDLE, ACCEL, and BRAKE are to be set. value for each and the HANDLE'S CENTER value are to be set as applicable. VOLUME SETTING HANDLE SETTING AD0:7bH CENTER 7bH LEFT MAX 1aH <----> a4H RIGHT MAX ACCEL SETTING AD1:30H MIN 31H <----> c0H MAX BRAKE SETTING AD2:38H MIN 39H <--->bcH MAX 1 Press the SERVICE button to select the Volume value to be changed. Press the TEST button to cause the characters of the selected Volume value to turn red. Input the value in the manner corresponding to the selected item. [. . . ] PARTS LIST TOP ASSY JAMBO SAFARI STD ITEM NO. 1 2 3 4 22 23 25 29 201 202 203 204 205 206 209 PART NO. 999-0887 DUT5-0300 999-0888 200-5787 INY-0004 DYN-0008 DYN-0011 LOCAL PURCHASE LOCAL PURCHASE 068-852216 000-T00440-0B LOCAL PURCHASE LOCAL PURCHASE 000-T00416-0C 010-P00408-F DESCRIPTION ASSY BILLBOARD ASSY COIN CHUTE TOWER ASSY COCKPIT CLR DSPLY 29 TYPE 31K 100V BACK LID INY BACK LID B DENOMI PLATE W/O ORIGINAL MARQUEE RETAINING PLATE 1/4-20X1 1/4" TMPR PRF SCREW FLT WSHR M8 M SCR PH W/FS BLK M4X40 HEX BLT 8/32-20X1 SPR WSHR 8/32-20X1 M SCR TH CRM M4X16 S-TITE SCR PH W/F M4X8 53 ASSY BILLBOARD STDJBA (999-0887) ITEM NO. 999-0872 999-0873 999-0731 999-0732 LOCAL PURCHASE DESCRIPTION MARQUEE PLEX JAMBO SAFARI LOWER MARQUEE PLEX JBA MARQUEE COVER L MARQUEE COVER R ASSY FL 20W EX W/CONN HIGH S 54 ASSY COINCHUTE TOWER (DUT5-0300) 55 ASSY COINCHUTE TOWER (DUT5-0300) ITEM NO. [. . . ]