User manual SEGA MINIRIDER2

[. . . ] Instead, it is the user's responsibility to dispose of their waste equipment by arranging to return it to a designated UK collection point for the correct recycling of waste electrical and electronic equipment. For more information about where you can send your waste equipment for recycling contact your local authority office. Battery Recycling Statement The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimize the impact of batteries on the environment and encourage the recovery of the materials they contain. To achieve increased collection and recycling of waste batteries, the Directive places 'producer responsibility' obligations on manufacturers and importers of portable, industrial and automotive batteries. The following symbol will be on all equipment fitted with batteries from 26th September 2008 and indicates they must NOT be disposed of with other normal waste. Instead, it is the user's responsibility to dispose of used batteries by arranging to return them to a designated collection point for the correct recycling of waste batteries. For more information about where you can send your waste batteries for recycling contact your local authority office. -2- -3- -4- TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1. [. . . ] After a setting has been changed, be sure to always exit the GAME TEST MODE. Also, always perform the steering wheel motor initialization operation before checking the steering wheel motor. 1. On the GAME TEST MODE screen, select STEERING FORCE FEEDBACK and press the TEST Button. The STEERING FORCE FEEDBACK screen appears. 01 STEERING FORCE FEEDBACK FORCE INITIALIZE <LEFT PLAYER> LEFT CENTER RIGHT <RIGHT PLAYER> LEFT CENTER RIGHT ÿÿ EXIT NORMAL COMPLETED OFF OFF OFF OFF OFF OFF SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON 2. Each item is explained below. FORCE INITIALIZE The force on the steering wheel can be set at 2 different levels; SOFT or NORMAL. (Default setting: NORMAL) Performs initialization operation for steering wheel motor. When selected, "INITIALIZING" is displayed and the steering wheel moves automatically. Do not touch the steering wheel until "COMPLETED" is displayed and the steering wheel has completely stopped moving. The motor moves each seat's steering wheel allowing its operation to be checked. Turn the steering wheel left and right when the screen indicates LEFT and RIGHT. Use the SERVICE Button to move the cursor to the desired test item. Press the TEST Button to select the test item. 4. When all setting adjustments are completed, select EXIT and press the TEST Button. The GAME TEST MODE screen reappears. - 51 - 9-3-7 CALIBRATION SETTING This screen is for adjusting and confirming the status of the steering wheel, gas pedal, and brake pedal. Periodically use this screen to confirm that each setting is appropriate. Also, when replacing the volume, use this screen to make adjustments. Setting changes do not become effective until EXIT has been selected on the GAME TEST MODE screen. After a setting has been changed, be sure to always exit the GAME TEST MODE. 1. On the GAME TEST MODE screen, select CALIBRATION SETTING and press the TEST Button. The CALIBRATION SETTING screen appears. 01 CALIBRATION SETTING STEERING LEFT STEERING RIGHT GAS LEFT GAS RIGHT BRAKE LEFT BRAKE RIGHT ÿ ÿ EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON 2. [. . . ] 1 2 101 102 103 301 PartsNo HMM- 1351 HMM- 1352 509- 5838- Y 509- 5495- 04- 91 280- 5275- SR10 HMM- 60036 PartsNo TÁ T START SW PLATE STICKER START AND VIEW SW PB LW 15Y- TK1670 1LPUSH BUTTON RED CORD CLAMP SR10 W SIGNAL START AND VIEW SW H - 102 - ASSY MOTION STOP SW ITEM NO. 1 101 301 PartsNo HMM- 1371 509- 6109- 91 HMM- 60037 PartsNo TÁ T BUTTON BRKT SW PB ABN2F10R ROHS W SIGNAL MOTION STOP SW H - 103 - ASSY CASH DOOR ITEM NO. 1 2 3 101 201 202 PartsNo HMM- 1401 HOT- 1203X ABX- 1262 220- 5794 060- F00400- 0B 065- E00300 PartsNo TÁ T CASH BOX DOOR CENTER TNG SIDE TNG CLY LOCK W KEYS / FLT W SHR BLK M4 E RING 3MM - 104 - SW UNIT ITEM NO. 1 2 101 201 PartsNo HMM- 1451 421- 12043- 01 838- 14548- 01 000- P00308- W PartsNo TÁ T SW BRKT STICKER SW PANEL CE SW & C VOL BD M SCR PH W FS M3X8 / - 105 - ACCEL UNIT ITEM NO. [. . . ]